Product Details | FLAT WASHER

5310-00-607-7116 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Part Alternates: 8417232, 5310-00-607-7116, 00-607-7116, 5310006077116, 006077116

Hardware and Abrasives | Nuts and Washers

Supply Group (FSG) NSN Assign. NIIN
53 01 JAN 1963 00-607-7116

Drawings & Photos | NSN 5310-00-607-7116


Cross Reference | NSN 5310-00-607-7116

Part Number Cage Code Manufacturer
8417232 19204 ARMY UNITED STATES DEPARTMENT OF THE

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5310-00-607-7116

Technical Data | NSN 5310-00-607-7116

Characteristic Specifications
MATERIAL STEEL COMP 1020 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
HARDNESS RATING 60.0 ROCKWELL C MINIMUM
HOLE DIAMETER 1.005 INCHES MINIMUM AND 1.010 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE 1 ROUND
OVERALL DIAMETER 1.552 INCHES MINIMUM AND 1.652 INCHES MAXIMUM
CENTER HOLE SHAPE STYLE 1 ROUND
CROSS-SECTIONAL SHAPE STYLE 1 RECTANGULAR
THICKNESS 0.133 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
SURFACE FINISH 63.0 MICROINCHES TOP 63.0 MICROINCHES BOTTOM
MANUFACTURERS CODE 19204
DESIGN CONTROL REFERENCE 8417232

Restrictions/Controls & Freight Information | NSN 5310-00-607-7116

Category Code Description
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 194120 WASHERS/GASKETS/PCKG DVCS NOI
Less than car load rating S 60
Less than truck load rating W Rating Variable
Water commodity Code 713 unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity V Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable