NSN 5310-00-588-2753 19144P, 19144PCMKP, 19144PCP
Product Details | FLAT WASHER
5310-00-588-2753 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Part Alternates: 19144P, 19144PCMKP, 19144PCP, 19187PC82, 2119569MKP, 21-19569MKP, 2119569MKPCP, 21-19569MKPCP, 5310-00-588-2753, 00-588-2753, 5310005882753, 005882753
Hardware and Abrasives | Nuts and Washers
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 31 JAN 1968 | 00-588-2753 | 13393 ( WASHER, FLAT ) |
Drawings & Photos | NSN 5310-00-588-2753
Demand History | NSN 5310-00-588-2753
| Part Number | Request Date | QTY | Origin |
|---|---|---|---|
| 5310-00-588-2753 | 2022-09-254 | 632 | DIBBS |
| 5310-00-588-2753 | 2018-10-281 | 376 | DIBBS |
| 5310-00-588-2753 | 2017-12-353 | 399 | DIBBS |
| 5310-00-588-2753 | 2017-11-306 | 399 | DIBBS |
| 5310-00-588-2753 | 2011-04-111 | 1566 | DIBBS |
| 5310-00-588-2753 | 2010-08-240 | 749 | DIBBS |
| 5310-00-588-2753 | 2010-01-19 | 596 | DIBBS |
| 5310-00-588-2753 | 2008-11-323 | 16 | DIBBS |
| 5310-00-588-2753 | 2008-06-182 | 169 | DIBBS |
Cross Reference | NSN 5310-00-588-2753
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 19144P | 81412 | TREADWELL CORPORATION |
| 19144PCMKP | 81412 | TREADWELL CORPORATION |
| 19144PCP | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG |
| 19187PC82 | 81412 | TREADWELL CORPORATION |
| 21-19569MKP | 81412 | TREADWELL CORPORATION |
| 21-19569MKP | D9182 | BOSCH REXROTH GMBH LOHMANN +STOLTERFOHT |
| 21-19569MKPCP | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5310-00-588-2753
Technical Data | NSN 5310-00-588-2753
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL OVERALL |
| HOLE DIAMETER | 0.640 INCHES MINIMUM AND 0.642 INCHES MAXIMUM |
| PERIPHERAL SHAPE STYLE | 1 ROUND |
| OVERALL DIAMETER | 0.995 INCHES MINIMUM AND 0.997 INCHES MAXIMUM |
| CENTER HOLE SHAPE STYLE | 1 ROUND |
| CROSS-SECTIONAL SHAPE STYLE | 1 RECTANGULAR |
| THICKNESS | 0.139 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| SURFACE FINISH | 63.0 MICROINCHES ALL SURFACES |
| MANUFACTURERS CODE | 81412 |
| DESIGN CONTROL REFERENCE | 21-19569MKP |
Restrictions/Controls & Freight Information | NSN 5310-00-588-2753
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | N | There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | S | The item is a non-aviation Critical Safety Item (CSI) whose failure will result in serious damage to equipment or serious injury or death to personnel. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| NMF Description | 194160 | WASHER OR GASKETS, IRON OR STEEL, |
| Less than car load rating | U | 50 |
| Less than truck load rating | U | 50.0 |
| Water commodity Code | 713 | unknown |
| Originating Activity Code | HD | Naval Inventory Control Point Mechanicsburg, PA 17055-0788 |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | B | Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 5310-00-588-2753
Navy| Category | Code | Description |
|---|---|---|
| Cognizance Codes | 9B | Navy-owned stocks of DLA material Naval Inventory Control Point, Mechanicsburg |
| Special Material ID | CP | An item that requires special cleaning and packaging for oxygen/nitrogen service (e.g, valves, piping systems, generators). |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DN | Department of the Navy |
| Service Organization | N | U.S. Navy |
| Acquisition Advice Codes | D | DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |