Product Details | FLAT WASHER

5310-00-584-7798 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Part Alternates: 5310-00-584-7798, 00-584-7798, 5310005847798, 005847798

Hardware and Abrasives | Nuts and Washers

Supply Group (FSG) NSN Assign. NIIN
53 00-584-7798

Drawings & Photos | NSN 5310-00-584-7798


Cross Reference | NSN 5310-00-584-7798

Part Number Cage Code Manufacturer
FF-W-92 81348 FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES
MS15795-829 80205 NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES
MS15795-829 96906 MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS
MS15795-829 CRE S 316 ONLY D9182 BOSCH REXROTH GMBH LOHMANN +STOLTERFOHT

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5310-00-584-7798

Technical Data | NSN 5310-00-584-7798

Characteristic Specifications
MATERIAL STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION 66 FED STD ALL MATERIAL RESPONSES OVERALL
SURFACE TREATMENT PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HOLE DIAMETER 1.368 INCHES MINIMUM AND 1.405 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE 1 ROUND
OVERALL DIAMETER 2.993 INCHES MINIMUM AND 3.030 INCHES MAXIMUM
CENTER HOLE SHAPE STYLE 1 ROUND
CROSS-SECTIONAL SHAPE STYLE 1 RECTANGULAR
THICKNESS 0.136 INCHES MINIMUM AND 0.192 INCHES MAXIMUM
NONDEFINITIVE SPEC/STD DATA A TYPE AND 1 GRADE AND B CLASS
MANUFACTURERS CODE 81348
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE FF-W-92

Restrictions/Controls & Freight Information | NSN 5310-00-584-7798

Category Code Description
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Category Code Description
No Freight Information