Product Details | FLAT WASHER

5310-00-499-2976 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Part Alternates: 5310-00-499-2976, 00-499-2976, 5310004992976, 004992976

Hardware and Abrasives | Nuts and Washers

Supply Group (FSG) NSN Assign. NIIN
53 00-499-2976

Drawings & Photos | NSN 5310-00-499-2976


Cross Reference | NSN 5310-00-499-2976

Part Number Cage Code Manufacturer
10293156 18876 U S ARMY AVIATION AND MISSILE COMMAND
50S3-1871 10855 CARRIER CORPORATION DIV CARRIER TRANSICOLD DIVISION
82604-11 5RQL2 DRS ENVIRONMENTAL SYSTEMS, INC. DBA D R S
82604-11 94833 KECO INDUSTRIES INC.
D4524-1969 60532 TRANE U.S. INC. DBA TRANE

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5310-00-499-2976

Technical Data | NSN 5310-00-499-2976

Characteristic Specifications
MATERIAL STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION QQ-S-698,COMPOSITION 1010-1020,CONDITION CR FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HOLE DIAMETER 0.280 INCHES NOMINAL
PERIPHERAL SHAPE STYLE 1 ROUND
OVERALL DIAMETER 0.800 INCHES MINIMUM AND 0.880 INCHES MAXIMUM
CENTER HOLE SHAPE STYLE 1 ROUND
CROSS-SECTIONAL SHAPE STYLE 1 RECTANGULAR
THICKNESS 0.060 INCHES NOMINAL
MANUFACTURERS CODE 18876
DESIGN CONTROL REFERENCE 10293156

Restrictions/Controls & Freight Information | NSN 5310-00-499-2976

Category Code Description
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Category Code Description
No Freight Information