Product Details | PLAIN STUD

5307-00-166-0971 A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.

Part Alternates: MS287822, MS28782-2 , M83248/1-010 , M83248/1-10 , M83248/18-010 , M832481010, M832481010ES, M83248-1-010ES , M83248110, M8324818010, N04483 , A26010VA, A26-010VA , AMS 7276 , AMS7276, ARP568-010 MIL- R-83248 , ARP568010MILR83248, AS3085010, AS3085-010 , AS3209010, AS3209-010 , AS32091010, AS3209-1-010 , ASC1442429 , SP43010 , ST1050010, ST1050-010 , VT70R010, VT-7-0R-010 , P-159 , P49783010, P49783-010 , MILR83248, MIL-R-83248/2-0 10 , MILR832482010, DF298851 FIND 7 , DF298851FIND7, G375B0100QTA, G-375-B-0100QT-A , J221P010 , JC52000462, JC52000-462 , L-1140-152 PIECE 31 , L1140152PIECE31, 01017507, 010-17507 , 1000006010, 1000-0060-10 , 10159966 , 1463RA PIECE 16 , 1463RAPIECE16, 1464RA PIECE 15 , 1464RAPIECE15, 1479RA PIECE 22 , 1479RAPIECE22, 2 0040-295 , 20040295, 2-010 77-545 , 2-010 V747-75 , 5307L200092, 5307L20-009-2, 581480, 58-14-80 , 626P008, 626P8, 705B504P25 , P159, 82-20010-07 , 8558 , 2010V074775, 2-010V0747-75 , 2010V116475, 2-010V1164-75 , 2010V122675, 2-010V1226-75 , 2010V74775, 2-010V747-75 , 2010V88475, 2-010-V884-75 , 20194 FIND 27 , 20194FIND27, 20346-400 FIND , 20346400FIND, 21090 FIND 18 , 21090FIND18, 21110 FIND 44 , 21110FIND44, 21302 FIND 55 , 2130255, 21302-55 , 21302FIND55, 21331 FIND 38 , 21331FIND38, 21333 FIND 26 , 21333FIND26, 21340 FIND 37 , 21340FIND37, 21418-400 FIND 11 , 21418400FIND11, 21471-400 FIND 22 , 21471400FIND22, 21487-400 FIND 12 , 21487400FIND12, 2154340014, 21543-400-14 , 21725-400 FIND 12 , 21725400FIND12, 21726-400 FIND 15 , 21726400FIND15, 21780-400 FIND 20 , 21780400FIND20, 21803 FIND 34 , 21803FIND34, 21820 FN 59 , 21820FN59, 21835 FIND 58 , 21835FIND58, 26010, 2AA376 , 3111, 311-1 , 3188607 ITEM 52 , 3188607ITEM52, 331365, 3426RA PIECE 15 , 3426RAPIECE15, 3427RA PIECE 18 , 3427RAPIECE18, 43291, 432-9-1 , 50011, 5-0011 , 52122 FIND 70 , 52122FIND70, 52125 FN 53 , 52125FN53, 5307-00-166-0971, 00-166-0971, 5307001660971, 001660971, 822001007, 201077545

Hardware and Abrasives | Studs

Supply Group (FSG) NSN Assign. NIIN
53 01 JAN 1963 00-166-0971

Drawings & Photos | NSN 5307-00-166-0971


Demand History | NSN 5307-00-166-0971

Part Number Request Date QTY Origin
M832481010 2024-10-283 68 United States
J221P010 2024-10-278 50 TH
AS3209010 2023-06-174 50 US
AS3209-010 2023-05-151 100 Philippines
AMS7276 2022-04-115 140 United States
AS3209010 2021-11-319 20 Germany
AS3209010 2021-09-263 50 US
M832481010 2021-05-141 14 US
AS3209-010 2021-02-42 0
AS3209-010 2020-10-303 0
M832481010 2020-06-157 8 us
M832481010 2020-05-149 50 Singapore
M832481010 2018-11-330 6 United States
M832481010 2018-11-330 100 United States
M832481010 2017-07-194 4 United States
M832481010 2017-06-163 110 United States
MILR83248 2017-03-83 3 United States
M83248/1-010 2017-03-68 2
M83248/1-010 2016-12-343 2
AS3209010 2016-10-284 10 China
AS3209010 2016-06-175 15 LK
AS3085-010 2016-03-81 20 United States
MILR83248 2016-03-81 18 United States
MILR83248 2016-03-81 9 United States
J221P010 2015-11-327 66 Malaysia
M832481010 2015-11-307 1 us
AS3209010 2015-07-209 24 KR
M83248/1-010 2015-07-206 2
AMS7276 2015-07-182 10 UK
AS3209010 2015-06-169 107 Seychelles
M83248/1-010 2015-03-85 84 US
J221P010 2015-03-76 20 TH
M83248/1-010 2015-03-69 500 US
J221P010 2014-11-325 32 Malaysia
AS3209010 2014-10-294 20 Philippines
AMS7276 2014-08-234 60 Seychelles
AS3209010 2014-08-234 60 Seychelles
MS287822 2014-08-218 1 United States
J221P010 2014-07-203 3 US
AS3209010 2014-02-49 1 US
M832481010 2014-02-36 10 AR
AS3209010 2013-12-344 24 India
AS3209010 2013-11-310 5 United States
N04483 2013-08-214 1 US
AS3209010 2013-07-197 20 LK
M832481010 2012-12-352 90 United States
J221P010 2012-10-278 6 US
J221P010 2012-10-278 6 US
J221P010 2012-10-278 590 US
J221P010 2012-04-102 50 United States
J221P010 2012-04-100 50 Indonesia
AMS7276 2012-03-76 30 TW
J221P010 2012-03-65 200 US
AS3209010 2012-02-38 10 Turkey
M832481010 2012-02-38 10 Turkey
AS32091010 2011-12-355 2 BR
M832481010 2011-11-305 180 United States
MILR83248 2011-10-304 301 KR
M832481010 2011-10-299 180 United States
AS3085010 2011-09-272 450 US
AS3209010 2011-09-272 450 US
M832481010 2011-09-255 180 United States
J221P010 2011-04-118 6 United States
J221P010 2011-03-64 20 GH
MILR83248 2011-01-05 1 CA
AS3209010 2010-06-176 100 United States
MS287822 2010-03-63 100 United States
M832481010 2010-03-63 120 IL
AS3209010 2010-02-54 100 Saudi Arabia
M832481010 2009-07-211 2 Brazil
M832481010 2009-07-211 16 Brazil
J221P010 2008-07-187 8 US
MILR83248 2007-08-221 4 US

Cross Reference | NSN 5307-00-166-0971

Part Number Cage Code Manufacturer
5307L20-009-2 81996 U S ARMY AVIATION AND MISSILE COMMAND
626P008 00198 PRATT & WHITNEY CANADA CIE DIVPRATT & WHITNEY CANADA CORP.
626P8 00198 PRATT & WHITNEY CANADA CIE DIVPRATT & WHITNEY CANADA CORP.

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5307-00-166-0971

Technical Data | NSN 5307-00-166-0971

Characteristic Specifications
MATERIAL STEEL COMP 8740
MATERIAL DOCUMENT AND CLASSIFICATION AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE
SURFACE TREATMENT CADMIUM OVERALL
OVERALL LENGTH 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM
THREAD SERIES DESIGNATOR UNF NUT THREAD UNS STUD THREAD
NOMINAL THREAD SIZE 0.312 INCHES NUT THREAD 0.312 INCHES STUD THREAD
THREAD CLASS 3A NUT THREAD
THREAD QUANTITY PER INCH 24 NUT THREAD 18 STUD THREAD
THREAD PITCH DIAMETERS 0.2883 TO 0.2909 INCHES STUD THREAD
THREAD DIRECTION RIGHT-HAND NUT THREAD RIGHT-HAND STUD THREAD
THREAD LENGTH 0.615 INCHES MINIMUM AND 0.700 INCHES MAXIMUM NUT THREAD 0.615 INCHES MINIMUM AND 0.725 INCHES MAXIMUM STUD THREAD
SPECIAL FEATURES STUD END THREAD 0.008 IN. OVERSIZE
III HARDNESS RATING 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
III DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END 0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM FIRST HOLE
III COTTER PIN HOLE DIAMETER 0.084 INCHES MINIMUM AND 0.094 INCHES MAXIMUM FIRST HOLE

Restrictions/Controls & Freight Information | NSN 5307-00-166-0971

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 573 unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity B Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5307-00-166-0971

Category Code Description
Materiel Category and Inventory ManagerT Industrial Supplies (DLA/GSA Items)
Appropriation and Budget Activity2 Stock Fund Secondary Items
Management Inventory Segment2 NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable.
Specific Group/Generic Code0 Medical Materiel
Weapons Systems/End Item or Homogeneous Group00DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
Accounting Requirements CodeX Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDADepartment of the Army
Service OrganizationAU.S. Army
ReparabilityZThis is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item.
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Materiel Management Aggregation CodeSXSX:AF SICA RESIDUAL MMAC-OC-ALC
Price ValidationV The current standard price has been validated.
  • The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
  • The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
  • ZOP or Standard price challenges are permissible but must be supported by adequate justification.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesYTERMINAL ITEM #(NON-STOCKED ITEMS) Future procurement is not authorized. No wholesale stock is available for issue. 1. Requisitions will not be processed to the wholesale manager. 2. Internal Service/agency requisitioning may be continued in accordance with the Service/agency requisitioning policies.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
Q
EA : Each