HOSE OR TUBING SPEC/STD DATA |
MIL-H-13444,TYPE 2 SPECIFICATION |
INNER CONVEYING TUBE MATERIAL |
RUBBER, NITRILE |
INSIDE SURFACE CONDITION |
SMOOTH |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED FABRIC 2ND LAYER BRAIDED WIRE OUTER LAYER RUBBER IMPREGNATED FABRIC |
OUTER COVERING ENVIRONMENTAL PROTECTION |
FUEL RESISTANT AND WEATHERPROOF |
EXTERIOR COLOR |
BLACK |
CROSS-SECTIONAL SHAPE STYLE |
1 ROUND |
INSIDE DIAMETER |
0.406 INCHES NOMINAL |
OUTSIDE DIAMETER |
0.770 INCHES NOMINAL |
MEASURING METHOD AND LENGTH |
10.750 INCHES NOMINAL WORKING |
MINIMUM INSIDE BENDING RADIUS |
4.620 INCHES |
FIRST END CONNECTION TYPE |
THREADED INTERNAL TUBE |
FIRST END STYLE DESIGNATOR |
C3 SWIVEL NUT FLARE |
FIRST END SEAT ANGLE IN DEG |
37.0 |
FIRST END CONNECTION DESIGN |
STRAIGHT |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM |
FIRST END THREAD SERIES DESIGNATOR |
UNJF |
FIRST END NOMINAL THREAD SIZE |
0.750 INCHES |
FIRST END THREAD CLASS |
3B |
FIRST END THREAD DIRECTION |
RIGHT-HAND |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
SECOND END CONNECTION TYPE |
THREADED INTERNAL TUBE |
SECOND END STYLE DESIGNATOR |
C3 SWIVEL NUT FLARE |
SECOND END SEAT ANGLE IN DEG |
37.0 |
SECOND END CONNECTION DESIGN |
ELBOW |
SECOND END FLOW ANGLE IN DEG |
45.0 |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM, QQ-P-416, TYPE 2, CLASS 3 |
SECOND END THREAD SERIES DESIGNATOR |
UNJF |
SECOND END NOMINAL THREAD SIZE |
0.750 INCHES |
SECOND END THREAD CLASS |
3B |
SECOND END THREAD DIRECTION |
RIGHT-HAND |
TEMP RATING |
-55.0 DEG FAHRENHEIT AND 300.0 DEG FAHRENHEIT |
MAXIMUM OPERATING PRESSURE |
1000.0 POUNDS PER SQUARE INCH |
HYDROSTATIC TEST PRESSURE |
2000.0 POUNDS PER SQUARE INCH |
BURST TEST PRESSURE |
4000.0 POUNDS PER SQUARE INCH |
VACUUM IN TORR |
254.0 |
MANUFACTURERS CODE |
80212 |
DESIGN CONTROL REFERENCE |
4190476-1 |