Product Details | FLUID FILTER ELEMENT

4330-01-511-8209 A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.20916500058Aircraft Hydraulic, Vacuum, and De-icing System Components29100042Engine Fuel System Components, Nonaircraft29150064Engine Fuel System Components, Aircraft and Missile Prime Movers29400064Engine Air and Oil Filters, Strainers, and Cleaners, Nonaircraft29450059Engine Air and Oil Filters, Cleaners, Aircraft Prime Moving43300057Centrifugals, Separators, and Pressure and Vacuum Filters5999000065300053Hospital Furniture, Equipment, Utensils, and Supplies66300029Chemical Analysis Instruments

Part Alternates: CM4205, CM420-5, I420MM, I-420MM, 643026, 4330-01-511-8209, 01-511-8209, 4330015118209, 015118209

Pumps and Compressors | Centrifugals, Separators, and Pressure and Vacuum Filters

Supply Group (FSG) NSN Assign. NIIN
43 18 AUG 2003 01-511-8209

Drawings & Photos | NSN 4330-01-511-8209


Demand History | NSN 4330-01-511-8209

Part Number Request Date QTY Origin
CM420-5 2024-10-305 752 DIBBS
I-420MM 2024-10-305 752 DIBBS
CM420-5 2024-10-298 331 DIBBS
I-420MM 2024-10-298 331 DIBBS
CM420-5 2024-10-277 469 DIBBS
I-420MM 2024-10-277 469 DIBBS
CM420-5 2023-11-334 989 DIBBS
I-420MM 2023-11-334 989 DIBBS
CM420-5 2023-11-323 989 DIBBS
I-420MM 2023-11-323 989 DIBBS
CM420-5 2023-06-181 1129 DIBBS
I-420MM 2023-06-181 1129 DIBBS
CM420-5 2023-06-170 1129 DIBBS
I-420MM 2023-06-170 1129 DIBBS
CM420-5 2023-04-96 827 DIBBS
I-420MM 2023-04-96 827 DIBBS
CM420-5 2023-03-85 827 DIBBS
I-420MM 2023-03-85 827 DIBBS
4330-01-511-8209 2021-05-127 18 US
4330-01-511-8209 2021-01-11 223 United States
4330-01-511-8209 2019-07-200 300 IQ
4330-01-511-8209 2019-05-126 500 US
4330-01-511-8209 2019-03-88 1 DIBBS-RFPs
4330-01-511-8209 2018-03-71 144 us
4330-01-511-8209 2018-02-37 10 AE
4330-01-511-8209 2018-02-37 10 AE
4330-01-511-8209 2018-02-36 10 United Kingdom
4330-01-511-8209 2018-01-26 5 US
4330-01-511-8209 2013-08-240 2263 DIBBS
4330-01-511-8209 2013-08-218 3159 DIBBS
4330-01-511-8209 2013-07-204 1465 DIBBS
4330-01-511-8209 2013-06-167 2362 DIBBS
4330-01-511-8209 2013-04-108 3382 DIBBS
4330-01-511-8209 2013-04-93 3382 DIBBS
4330-01-511-8209 2013-03-65 2454 DIBBS
4330-01-511-8209 2013-02-58 2870 DIBBS
4330-01-511-8209 2013-01-31 2420 DIBBS
4330-01-511-8209 2013-01-07 992 DIBBS
4330-01-511-8209 2012-12-348 985 DIBBS
4330-01-511-8209 2012-11-311 35 US
4330-01-511-8209 2012-11-311 35 US
4330-01-511-8209 2012-07-184 30 Mexico
4330-01-511-8209 2011-03-80 2811 DIBBS
4330-01-511-8209 2010-09-252 500 AE
I420MM 2009-06-152 540 United States
4330-01-511-8209 2009-06-152 540 US
4330-01-511-8209 2009-06-152 540 US
4330-01-511-8209 2008-10-305 60 MX
CM4205 2008-10-305 60 MX
4330-01-511-8209 2008-10-305 60 MX
4330-01-511-8209 2008-01-18 90 MX
4330-01-511-8209 2007-09-269 777 DIBBS
4330-01-511-8209 2007-06-171 1244 DIBBS
CM4205 2006-11-326 42 US
4330-01-511-8209 2006-06-170 1521 DIBBS
4330-01-511-8209 2006-05-139 3930 DIBBS

Cross Reference | NSN 4330-01-511-8209

Part Number Cage Code Manufacturer
643026 87405 PECOFACET OKLAHOMA LLC DIV PECOFACET OKLAHOMA LLC
CM420-5 87405 PECOFACET OKLAHOMA LLC DIV PECOFACET OKLAHOMA LLC
I-420MM 13573 VELCON FILTERS, LLC
I-420MM T5423 MATES TASIT SAN. VE TIC.LTD.STI.

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 4330-01-511-8209

Technical Data | NSN 4330-01-511-8209

Characteristic Specifications
STYLE DESIGNATOR A6 CYLINDRICAL W/OUT CONTAINER
BODY DIAMETER 3.750 INCHES NOMINAL
BODY INSIDE DIAMETER 1.187 INCHES NOMINAL
SPECIAL FEATURES USED IN AF MOBILE AND FIXED FUEL SYSTEM.THE PURPOSE OF THIS NEW PART IS TO SUPPLY QUALITY FUEL TO THE AIRCRAFT FOR SAFETY OF FLIGHT.THIS HAS BEEN QUALIFIED TO API/IP 1581.SPECIFICATION AND QUALIFICATION PROCEDURES FOR AVIATION JET FUEL FILTER/SEPARATORS, FIFTH EDITION, JULY 2002.AF ACTIVITY CODE IS SP
SPECIAL TEST FEATURES QUALIFICATION TEST REPORT NO 6-0564-02
CRITICALITY CODE JUSTIFICATION SPCL AND FEAT
III PURCHASE DESCRIPTION IDENTIFICATION 87405-CM420-5
III PART NAME ASSIGNED BY CONTROLLING AGENCY COALESCER CARTRIDGE

Restrictions/Controls & Freight Information | NSN 4330-01-511-8209

Category Code Description
Shelf-Life Code:R48 months
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:YThe item does not have a nuclear hardened feature but does have other critical feature(s) such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 069100 FILTERS:CARTRIDGES/ELEMENTS
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 594 unknown
Originating Activity Code AX Defense Supply Center Columbus
Columbus, OH 43216-5000
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity E Engineer supplies, other than those listed under code B.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 4330-01-511-8209

Category Code Description
Materiel Category and Inventory ManagerJ Ground Forces Support Materiel (DLA/GSA Items)
Appropriation and Budget Activity2 Stock Fund Secondary Items
Management Inventory Segment2 NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable.
Specific Group/Generic Code0 Medical Materiel
Weapons Systems/End Item or Homogeneous Group00DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
Accounting Requirements CodeX Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDADepartment of the Army
Service OrganizationAU.S. Army
ReparabilityZThis is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item.
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life CodeR48 months
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life CodeR48 months
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life CodeR48 months
Purchasing QTY
UOM
1
EA : Each