Product Details | NONMETALLIC HOSE ASSEMBLY

4210-01-039-4855 A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see HOSE, NONMETALLIC. Excludes HOSE ASSEMBLY, AIR DUCT; and HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.20242100023Fire Fighting Equipment47200024Hose and Flexible Tubing

Part Alternates: 5100186, 5100-186, 4210-01-039-4855, 01-039-4855, 4210010394855, 010394855

Fire Fighting, Rescue, and Safety Equipment; and Environmental Protection Equipment and Materials | Fire Fighting Equipment

Supply Group (FSG) NSN Assign. NIIN
42 01-039-4855

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 4210-01-039-4855

Technical Data | NSN 4210-01-039-4855

Characteristic Specifications
INNER CONVEYING TUBE MATERIAL RUBBER, SYNTHETIC
MEDIA FOR WHICH DESIGNED WATER
INSIDE SURFACE CONDITION SMOOTH
LAYER COMPOSITION AND LOCATION 1ST LAYER WOVEN COTTON CORD
OUTER COVERING ENVIRONMENTAL PROTECTION MILDEW RESISTANT
EXTERIOR COLOR ANY ACCEPTABLE
CROSS-SECTIONAL SHAPE STYLE 1 ROUND
INSIDE DIAMETER 1.000 INCHES NOMINAL
OUTSIDE DIAMETER 1.312 INCHES NOMINAL
MEASURING METHOD AND LENGTH 600.000 INCHES NOMINAL OVERALL
MINIMUM INSIDE BENDING RADIUS NOT RATED
FIRST END FITTING SPEC/STD DATA USDA NO. 102 TYA SPECIFICATION
FIRST END CONNECTION TYPE THREADED INTERNAL HOSE
FIRST END STYLE DESIGNATOR C18 GASKET SEAL
FIRST END CONNECTION DESIGN STRAIGHT
FIRST END SWIVEL ACTION CAPABILITY NOT INCLUDED
FIRST END FITTING/COMPONENT AND MATERIAL COMPLETE FITTING BRASS
FIRST END THREAD SERIES DESIGNATOR NPSH
FIRST END NOMINAL THREAD SIZE 1.000 INCHES
FIRST END THREAD DIRECTION RIGHT-HAND
SECOND END RELATIONSHIP WITH FIRST END NOT IDENTICAL
SECOND END FITTING SPEC/STD DATA USDA NO. 102 TYA SPECIFICATION
SECOND END CONNECTION TYPE THREADED EXTERNAL HOSE
SECOND END STYLE DESIGNATOR D12 SWIVEL, PLAIN
SECOND END CONNECTION DESIGN STRAIGHT
SECOND END SWIVEL ACTION CAPABILITY NOT INCLUDED
SECOND END FITTING/COMPONENT AND MATERIAL COMPLETE FITTING BRASS
SECOND END THREAD SERIES DESIGNATOR NPSH
SECOND END NOMINAL THREAD SIZE 1.000 INCHES
SECOND END THREAD DIRECTION RIGHT-HAND
TEMP RATING NOT RATED
MAXIMUM OPERATING PRESSURE NOT RATED
HYDROSTATIC TEST PRESSURE 450.0 POUNDS PER SQUARE INCH
BURST TEST PRESSURE 900.0 POUNDS PER SQUARE INCH
SPECIFICATION/STANDARD DATA 04024-5100 GOVERNMENT SPECIFICATION
MANUFACTURERS CODE 04024
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE 5100-186

Restrictions/Controls & Freight Information | NSN 4210-01-039-4855

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Category Code Description
No Freight Information