NSN 3416-00-387-9521 MILL45943, 341621118030, 3416-2111-8030
Product Details | ENGINE LATHE
3416-00-387-9521 00001013416000000
Part Alternates: MILL45943, 341621118030, 3416-2111-8030, 60, 16IN, 3416-00-387-9521, 00-387-9521, 3416003879521, 003879521
Metalworking Machinery | Lathes
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
34 | 01 JAN 1963 | 00-387-9521 | 03137 ( LATHE, ENGINE0 ) |
Demand History | NSN 3416-00-387-9521
Part Number | Request Date | QTY | Origin |
---|---|---|---|
60 | 2019-06-178 | 6 | |
60 | 2018-02-58 | 3 | |
60 | 2017-04-102 | 2 | |
60 | 2016-11-335 | 2 | |
60 | 2016-10-289 | 1 | |
60 | 2010-09-268 | 4 |
Request a Quote
What Our Customers Say
Compare
NSNs for Compare ( up to 4 ): Add 3416-00-387-9521
Related Products | NSN 3416-00-387-9521
Technical Data | NSN 3416-00-387-9521
Characteristic | Specifications |
---|---|
MOUNTING TYPE | FLOOR |
DESIGN TYPE | SCREW |
THREAD CHANGE QUANTITY | 48 |
THREAD QUANTITY RANGE | 2.0 TO 72.0 PER INCH |
PERFORMANCE TYPE | STANDARD DUTY |
PURPOSE FOR WHICH DESIGNED | GENERAL |
BED TYPE | SOLID |
RATED SWING | 16.000 INCHES NOMINAL |
ACTUAL SWING OVER BED | 18.000 INCHES MINIMUM |
SWING OVER CROSS SLIDE | 10.000 INCHES NOMINAL |
CENTER TO CENTER DISTANCE | 54.000 INCHES NOMINAL |
HEADSTOCK DRIVE TYPE | GEARED HEAD |
HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 4 ASA STANDARD |
HOLE DIAMETER THROUGH SPINDLE | 1.562 INCHES NOMINAL |
SPINDLE SPEED QUANTITY | 12 |
SPINDLE SPEED RANGE IN RPM | 40.0 TO 1450.0 |
CARRIAGE QUANTITY | 1 |
CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
CARRIAGE FEED CHANGE QUANTITY | 48 |
GEAR CHANGE TYPE | QUICK |
ELECTRIC MOTOR QUANTITY | 1 |
ELECTRIC MOTOR HORSEPOWER RATING | 7.500 |
CURRENT TYPE | AC |
VOLTAGE IN VOLTS | 220.0 AND 440.0 |
FREQUENCY IN HERTZ | 60.0 |
PHASE | THREE |
ACCESSORY COMPONENTS AND QUANTITY | DOG,LATHE,BENT TAIL,SAFETY SCREW,SIZES 1,2,3,4,AND 5 IN.COMPLETE WITH WRENCH,SET HOLDER,LATHE TOOL,CUTOFF WITH 1/8 IN. BLADE,C/0 3 HOLDERS,1 RIGHT HAND,1 LEFT HAND,1 STRAIGHT,SET HOLDER,LATHETURNING TOOL,C/O 3 HOLDERS,1 RIGHT HAND OFFSET,1 LEFT HAND OFFSET,1 STRAIGHT,HOLDER,THREADING TOOL FOR FORMED CUTTER W/HIGH SPEED,60 DEG.ANGLE V-THD. CUTTER AND WRENCH,1/2 IN. BORING BAR,3/4 IN. BORING BAR,HOLDER FOR BORING BAR |
MANUFACTURERS CODE | 81349 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MILL45943 |
Restrictions/Controls & Freight Information | NSN 3416-00-387-9521
Category | Code | Description |
---|---|---|
Shelf-Life Code: | 0 | Nondeteriorative |
Hazardous Material Indicator Code | N | There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials |
Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
Controlled Inventory Item Code: | U | UNCLASSIFIED |
Precious Metals Indicator Code: | A | Item does not contain precious metal |
Criticality Code: | N | The item does not have a critical feature such as tolerance, fit restrictions or application. Nuclear hardness properties have not been determined (not valid for input). |
Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
Category | Code | Description |
---|---|---|
NMF Description | 123980 | LATHES,MTL WORKNG |
Less than car load rating | M | 85 |
Less than truck load rating | M | 85.0 |
Water commodity Code | 72E | unknown |
Originating Activity Code | XX | |
Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
Air Commodity | V | Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above. |
Air Special Handling | Z | No special handling required. |
Special Handling Code | Z | unknonwn |
HAZMAT | ||
Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 3416-00-387-9521
Category | Code | Description |
---|---|---|
Materiel Category and Inventory Manager | M | Ammunition weapons, and tracked combat vehicles weapons, special weapons, chemical and fire control materiel |
Appropriation and Budget Activity | Q | Other Support Equipment |
Management Inventory Segment | 1 | REPARABLE ITEMS (Exclusive of Insurance and Provisioning Items.) This code will be used to identify serviceable or unserviceable items of a durable nature which when unserviceable normally can be repaired economically by depots or lower echelons of maintenance. |
Specific Group/Generic Code | L | Other Weapons Categories |
Weapons Systems/End Item or Homogeneous Group | L6 | Major Items Shop Equipment |
Accounting Requirements Code | N | Nonexpendable item. An item of Army property coded with an ARC of?N?in the AMDF. Nonexpendable items require property book accountability after issue from the stock record account. Commercial and fabricated items similar to items coded ?N? in the AMDF are considered nonexpendable items. |
Source of Supply | B14 | US Army Armament and Chemical Acquisition and Logistics Activity ATTN: AMSTA-AC Rock Island, IL 61299-6000 |
Agency | DA | Department of the Army |
Service Organization | A | U.S. Army |
Reparability | D | When repair is beyond lower level maintenance capability, evacuate the item to depot. Disposal is not authorized below wholesale level. |
Acquisition Advice Codes | Y | TERMINAL ITEM #(NON-STOCKED ITEMS) Future procurement is not authorized. No wholesale stock is available for issue. 1. Requisitions will not be processed to the wholesale manager. 2. Internal Service/agency requisitioning may be continued in accordance with the Service/agency requisitioning policies. |
Controlled Item Code | U | UNCLASSIFIED |
Shelf Life Code | 0 | Nondeteriorative |
Purchasing | QTY UOM |
1 EA : Each |
Category | Code | Description |
---|---|---|
Fund Code | AF | HQ USAF regulated. |
Price Validation | N | The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
|
Budget Code | Y | variousO & M:AF centrally procured equipment items. They are separate, primary end items (other than the weapon system itself) needed by a user to perform an assigned mission. They are nonexpendable items (ERRCD NF or ND) which are not consumed in use, and they do not lose their original identity during periods of use by incorporation into, or attachment to another assembly. |
Source of Supply | FLZ | Warner Robins Air Logistics Center Robins AFB, GA 31098-5609 |
Agency | DF | Department of the Air Force |
Service Organization | F | U.S. Air Force |
Reparability | U | AF Equipment Management System (AFEMS) |
Acquisition Advice Codes | J | NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition. |
Controlled Item Code | U | UNCLASSIFIED |
Shelf Life Code | 0 | Nondeteriorative |
Purchasing | QTY UOM |
1 EA : Each |