NSN 3040-01-529-8202 015298202
Product Details | SHOULDERED SHAFT
3040-01-529-8202 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Part Alternates: 015298202
Mechanical Power Transmission Equipment | Miscellaneous Power Transmission Equipment
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
30 | 03 MAY 2005 | 01-529-8202 | 22914 ( SHAFT, SHOULDERED ) |
Cross Reference | NSN 3040-01-529-8202
Part Number | Cage Code | Manufacturer |
---|---|---|
2852-0113 | 1W506 | CARLETON TECHNOLOGIES INC DIV TAMPA FACILITY |
2852-0113-1 | 1W506 | CARLETON TECHNOLOGIES INC DIV TAMPA FACILITY |
2852-0113-1D4 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG |
2852-2001-11 ITEM 23 | 04577 | CARLETON TECHNOLOGIES INC |
2852-2001-11 ITEM 23D4 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG |
2852-2001-11-23 | 1W506 | CARLETON TECHNOLOGIES INC DIV TAMPA FACILITY |
2852-2001-11-23D4 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG |
2852-2001-13-23 | 04577 | CARLETON TECHNOLOGIES INC |
2852-2001-13-23D4 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG |
2852200111A-23 | 96169 | ELECTRIC BOAT CORPORATION |
2852200111A-23D4 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG |
7383858-28522001113-23 | 53711 | NAVAL SEA SYSTEMS COMMAND |
7383858-28522001113-23D4 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG |
7550478-2852-2001-13-23 | 53711 | NAVAL SEA SYSTEMS COMMAND |
7550478-2852-2001-13-23D4 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG |
7550478-2852200111A-23 | 53711 | NAVAL SEA SYSTEMS COMMAND |
7550478-2852200111A-23D4 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG |
G547-0002-2852-2001-13-23 | 96169 | ELECTRIC BOAT CORPORATION |
G547-0002-2852-2001-13-23D4 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG |
G547-0002-2852200111A-23 | 96169 | ELECTRIC BOAT CORPORATION |
G547-0002-2852200111A-23D4 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG |
H547-0001-28522001113-23 | 96169 | ELECTRIC BOAT CORPORATION |
H547-0001-28522001113-23D4 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG |
Request a Quote
What Our Customers Say
Compare
Related Products | NSN 3040-01-529-8202
Technical Data | NSN 3040-01-529-8202
Characteristic | Specifications |
---|---|
MATERIAL | ALUMINUM ALLOY AND COPPER ALLOY |
MATERIAL DOCUMENT AND CLASSIFICATION | ASTMB150 ASSN STD SINGLE MATERIAL RESPONSE |
FIRST END STYLE | 17 HEXAGONAL |
FIRST END DIAMETER | 0.6450 INCHES NOMINAL |
FIRST END EXTERNAL THREAD LENGTH | 0.372 INCHES NOMINAL |
END SIMILARITY | NOT IDENTICAL |
SECOND END STYLE | 1 PLAIN |
SECOND END DIAMETER | 0.5620 INCHES NOMINAL |
LARGEST STEP DIAMETER | 0.540 INCHES NOMINAL |
OVERALL LENGTH | 0.350 INCHES NOMINAL |
STEP QUANTITY | 5 |
SPECIAL FEATURES | QUALITY ASSURANCE TESTED AND CERTIFIED FOR DEEP SUBMERGENCE SYSTEMS |
CRITICALITY CODE JUSTIFICATION | FEAT |
Restrictions/Controls & Freight Information | NSN 3040-01-529-8202
Category | Code | Description |
---|---|---|
Shelf-Life Code: | 0 | Nondeteriorative |
Hazardous Material Indicator Code | N | There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials |
Demilitarization Code: | B | Munitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.) |
Controlled Inventory Item Code: | U | UNCLASSIFIED |
Electro-static Discharge Susceptible: | A | No known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity |
Precious Metals Indicator Code: | A | Item does not contain precious metal |
Criticality Code: | S | The item is a non-aviation Critical Safety Item (CSI) whose failure will result in serious damage to equipment or serious injury or death to personnel. |
Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
Category | Code | Description |
---|---|---|
NMF Description | 126900 | POWER TRANS SHAFTING/SHAFTS |
Less than car load rating | ||
Less than truck load rating | W | Rating Variable |
Water commodity Code | 593 | unknown |
Originating Activity Code | HD | Naval Inventory Control Point Mechanicsburg, PA 17055-0788 |
Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
Air Commodity | V | Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above. |
Air Special Handling | Z | No special handling required. |
Special Handling Code | 9 | unknonwn |
HAZMAT | ||
Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 3040-01-529-8202
Category | Code | Description |
---|---|---|
Cognizance Codes | 1H | Consumable material assigned to NAVICP MECH for inventory management Naval Inventory Control Point, Mechanicsburg |
Special Material ID | D4 | An item that supports the Deep Submergence Program and is considered Scope of Certification MCD "B" material. Each item has undergone Receipt Inspection to insure it meets the requirements of the applicable specification and /or drawing and is certified for use in DSS-SOC applications. Items shall have 10.3-140 CODEIDENTIFIES ITEMS WITH PREDOMINANT APPLICATION TO:serialization markings identified on a securely attached Ready For Issue (RFI) tag. |
Special Material Content | 9 | Non-Hazardous or Non-Sensitive Item, does not require hazardous or special handling, packaging or precautions |
Source of Supply | NRP | NAVICP-ERP 700 Robbins Avenue Philadelphia, PA 19111-5098 |
Agency | DN | Department of the Navy |
Service Organization | N | U.S. Navy |
Reparability | M | Medium Demand Velocity Items (consumables) |
Acquisition Advice Codes | D | DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures. |
Controlled Item Code | U | UNCLASSIFIED |
Shelf Life Code | 0 | Nondeteriorative |
Purchasing | QTY UOM |
1 EA : Each |