Product Details | SHOULDERED SHAFT

3040-01-493-6171 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Part Alternates: 465301, 46530-1, 3040-01-493-6171, 01-493-6171, 3040014936171, 014936171

Mechanical Power Transmission Equipment | Miscellaneous Power Transmission Equipment

Supply Group (FSG) NSN Assign. NIIN
30 11 JAN 2002 01-493-6171

Drawings & Photos | NSN 3040-01-493-6171


Demand History | NSN 3040-01-493-6171

Part Number Request Date QTY Origin
3040-01-493-6171 2020-07-213 1 United States
3040-01-493-6171 2020-04-110 1 United States
46530-1 2020-01-30 21 DIBBS
46530-1 2020-01-17 121 DIBBS
3040-01-493-6171 2017-12-354 1 DIBBS-RFPs
3040-01-493-6171 2017-07-186 3 DIBBS
3040-01-493-6171 2017-06-169 21 DIBBS
3040-01-493-6171 2017-05-137 6 DIBBS
3040-01-493-6171 2017-01-29 22 DIBBS
3040-01-493-6171 2016-12-340 31 DIBBS
3040-01-493-6171 2016-11-312 28 DIBBS
3040-01-493-6171 2016-11-312 11 DIBBS
3040-01-493-6171 2016-08-217 22 DIBBS
3040-01-493-6171 2016-06-164 26 DIBBS
3040-01-493-6171 2016-04-115 36 DIBBS
3040-01-493-6171 2016-01-29 13 DIBBS
3040-01-493-6171 2016-01-07 13 DIBBS
3040-01-493-6171 2015-12-347 45 DIBBS
3040-01-493-6171 2015-10-278 9 DIBBS
3040-01-493-6171 2015-08-225 9 DIBBS
3040-01-493-6171 2015-08-214 9 DIBBS
3040-01-493-6171 2014-10-300 31 DIBBS
3040-01-493-6171 2014-10-289 31 DIBBS
3040-01-493-6171 2014-10-275 13 DIBBS
3040-01-493-6171 2014-04-91 13 DIBBS
3040-01-493-6171 2014-03-76 13 DIBBS

Cross Reference | NSN 3040-01-493-6171

Part Number Cage Code Manufacturer
46530-1 58163 MEGGITT (NORTH HOLLYWOOD), INC. DBA MEGGITT CONTROL SYSTEMS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 3040-01-493-6171

Technical Data | NSN 3040-01-493-6171

Characteristic Specifications
FIRST END STYLE 20 BEARING SEAT
END SIMILARITY NOT IDENTICAL
SECOND END STYLE 12 EXTERNAL THREADED
III END ITEM IDENTIFICATION 2350-01-258-7401

Restrictions/Controls & Freight Information | NSN 3040-01-493-6171

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 126900 POWER TRANS SHAFTING/SHAFTS
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 593 unknown
Originating Activity Code AX Defense Supply Center Columbus
Columbus, OH 43216-5000
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity V Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 3040-01-493-6171

Category Code Description
Stores Account Code1Marine Corps Stock Fund Account Item.
Combat Essentiality Code5Critical Repair Part to a Combat Essential End Item. Those parts or components whose failure in a combat essential end item will render the end item inoperative or reduce its effectiveness below the minimum acceptable level of efficiency.
Materiel Management CodeBAll CommoditiesDefense Logistics Agency, (DLA,)
Echelon Management Code2ICP/DSSC Marine Corps-managed Recoverability Code D items and Defense Logistics Agency (DLA)/TACOM/GSA) items which the integrated manager has not decontrolled.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDMU.S. Marine Corps
Service OrganizationMU.S. Marine Corps
ReparabilityZNonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code.
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each