Product Details | STRAIGHT SHAFT

3040-01-311-5589 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.20310050000101500003040000000

Part Alternates: 738717, 3040-01-311-5589, 01-311-5589, 3040013115589, 013115589

Mechanical Power Transmission Equipment | Miscellaneous Power Transmission Equipment

Supply Group (FSG) NSN Assign. NIIN
30 01 DEC 1989 01-311-5589

Drawings & Photos | NSN 3040-01-311-5589


Demand History | NSN 3040-01-311-5589

Part Number Request Date QTY Origin
3040-01-311-5589 2012-05-143 15 DIBBS
3040-01-311-5589 2010-09-260 23 DIBBS
3040-01-311-5589 2009-10-279 5 DIBBS
3040-01-311-5589 2008-12-352 7 DIBBS
3040-01-311-5589 2007-06-176 3 DIBBS
3040-01-311-5589 2007-05-141 5 DIBBS
3040-01-311-5589 2006-04-103 1 DIBBS

Cross Reference | NSN 3040-01-311-5589

Part Number Cage Code Manufacturer
738717 99167 HAMILTON SUNDSTRAND CORPORATION

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 3040-01-311-5589

Technical Data | NSN 3040-01-311-5589

Characteristic Specifications
MATERIAL STEEL
FIRST END STYLE 9 INTERNAL THREADED
FIRST END DIAMETER 0.3680 INCHES NOMINAL
FIRST END INTERNAL THREAD LENGTH 0.3000 INCHES NOMINAL
END SIMILARITY IDENTICAL
OVERALL LENGTH 0.9680 INCHES NOMINAL
SPECIAL FEATURES FIRST END HAS FULL SLOT 0.062 IN.WIDE;UNTHREADED HOLE DRILLED 0.412 IN.FROM SECOND END,0.125 IN. DIA.,0.172 IN. DEEP
III END ITEM IDENTIFICATION DRIVE CONSTANT SPEED C-5B ACFT
MANUFACTURERS CODE 99167
DESIGN CONTROL REFERENCE 738717

Restrictions/Controls & Freight Information | NSN 3040-01-311-5589

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 126900 POWER TRANS SHAFTING/SHAFTS
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 593 unknown
Originating Activity Code SX Oklahoma City Air Logistics Center
Tinker AFB, OK 73145-3043
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity V Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 3040-01-311-5589

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeHSSX:AIRCRAFT HYDRAULIC SYSTEMS AND COMPONENTS
Price ValidationP The current standard price is the initial negotiated provisioned price.
  • This is the price paid by DoD for the item as the result of price negotiation of the Provisioned Item Order (PIO) or other initial negotiated price.
  • ZOP or Standard Price challenges are permissible but should be supported with adequate justification.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each