NSN 3040-01-243-9042 212F238, 01-243-9042, 012439042

Product Details | SHOULDERED SHAFT

3040-01-243-9042 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Part Alternates: 212F238, 3040-01-243-9042, 01-243-9042, 3040012439042, 012439042

Mechanical Power Transmission Equipment | Miscellaneous Power Transmission Equipment

Supply Group (FSG)	NSN Assign.	NIIN	Item Name Code (INC)
30	02 NOV 1986	01-243-9042	22914 ( SHAFT, SHOULDERED )

Drawings & Photos | NSN 3040-01-243-9042

Part Number	Request Date	QTY	Origin
212F238	2022-03-88	21	DIBBS
212F238	2021-06-168	11	DIBBS
212F238	2019-06-164	7	DIBBS
3040-01-243-9042	2019-04-116	7	US
3040-01-243-9042	2018-12-339	7	DIBBS
3040-01-243-9042	2016-10-284	20	DIBBS
3040-01-243-9042	2016-08-241	2	DIBBS
3040-01-243-9042	2016-07-196	15	DIBBS
3040-01-243-9042	2016-03-63	4	DIBBS
3040-01-243-9042	2010-11-305	8	DIBBS
3040-01-243-9042	2010-03-67	10	DIBBS
3040-01-243-9042	2010-02-48	9	DIBBS
3040-01-243-9042	2009-12-345	2	DIBBS
3040-01-243-9042	2009-12-344	14	DIBBS
3040-01-243-9042	2009-11-327	5	DIBBS
3040-01-243-9042	2009-11-322	34	DIBBS
3040-01-243-9042	2009-11-306	6	DIBBS
3040-01-243-9042	2009-10-295	7	DIBBS
3040-01-243-9042	2009-08-219	5	DIBBS
3040-01-243-9042	2009-06-152	16	DIBBS

Cross Reference | NSN 3040-01-243-9042

Part Number	Cage Code	Manufacturer
212F238	05606	GENERAL DYNAMICS-OTS, INC. DBA GD-OTS (WILLISTON)

Request a Quote

What Our Customers Say

Thank you very much for the excellent service and professional customer care.

Ernie G. Honeywell

The service was excellent. I can think of no improvements to date that you can make regarding internet sales.

John L. Raytheon

The representative for WBParts was efficient & handled our request in a timely & professional manner.

Karen G. General Dynamics

Tried two other sources, neither of them responded, was all done online, never spoke to anyone.

Rex S. US Airforce

The response is quick and the price is often very good. We are completely satisfied.

Patricia S. NASA

Compare

NSNs for Compare ( up to 4 ): Add 3040-01-243-9042

Compare

Related Products | NSN 3040-01-243-9042

3040-01-243-9049, 3040-01-243-9057, 3040-01-243-9146, 3040-01-243-9770, 3040-01-243-9800

Technical Data | NSN 3040-01-243-9042

Characteristic	Specifications
MATERIAL	STEEL
FIRST END STYLE	23 UNTHREADED CROSS DRILLED
FIRST END DIAMETER	0.1250 INCHES NOMINAL
FIRST END HOLE DIAMETER	1.3800 INCHES NOMINAL
FIRST END DISTANCE FROM HOLE CENTER TO END	0.250 INCHES NOMINAL
END SIMILARITY	NOT IDENTICAL
SECOND END STYLE	23 UNTHREADED CROSS DRILLED
SECOND END DIAMETER	0.2480 INCHES MINIMUM AND 0.2490 INCHES MAXIMUM
SECOND END HOLE DIAMETER	0.1260 INCHES MINIMUM AND 0.1290 INCHES MAXIMUM
SECOND END DISTANCE FROM HOLE CENTER TO END	1.360 INCHES MINIMUM AND 1.400 INCHES MAXIMUM
LARGEST STEP DIAMETER	0.340 INCHES NOMINAL
OVERALL LENGTH	8.300 INCHES NOMINAL
STEP QUANTITY	2

Restrictions/Controls & Freight Information | NSN 3040-01-243-9042

Restrictions
Freight

Category	Code	Description
Shelf-Life Code:	0	Nondeteriorative
Hazardous Material Indicator Code	N	There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:	Q	Strategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.”
Controlled Inventory Item Code:	U	UNCLASSIFIED
Precious Metals Indicator Code:	A	Item does not contain precious metal
Criticality Code:	X	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Category	Code	Description
NMF Description	126900	POWER TRANS SHAFTING/SHAFTS
Less than car load rating
Less than truck load rating	W	Rating Variable
Water commodity Code	593	unknown
Originating Activity Code	ZS	Denmark ZT ZU
Air Dimension Code	A	Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity	V	Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Air Special Handling	Z	No special handling required.
Special Handling Code	9	unknonwn
HAZMAT
Type of Cargo	Z	No special type of cargo code applicable

Management | NSN 3040-01-243-9042

Air Force
Navy

Category	Code	Description
Budget Code	9	General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price Validation	N	The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM. The price has not been analyzed or reviewed for accuracy. ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund Code	SF	Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Materiel Management Aggregation Code	SX	SX:AF SICA RESIDUAL MMAC-OC-ALC
Source of Supply	SMS	Defense Logistics Agency Enterprise Business Systems
Agency	DF	Department of the Air Force
Service Organization	F	U.S. Air Force
Reparability	N	Stock Fund (except Munitions)
Acquisition Advice Codes	D	DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item Code	U	UNCLASSIFIED
Shelf Life Code	0	Nondeteriorative
Purchasing	QTY UOM	1 EA : Each

Category	Code	Description
Cognizance Codes	9B	Navy-owned stocks of DLA material Naval Inventory Control Point, Mechanicsburg
Source of Supply	SMS	Defense Logistics Agency Enterprise Business Systems
Agency	DN	Department of the Navy
Service Organization	N	U.S. Navy
Acquisition Advice Codes	D	DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item Code	U	UNCLASSIFIED
Shelf Life Code	0	Nondeteriorative
Purchasing	QTY UOM	1 EA : Each