Product Details | SHOULDERED SHAFT

3040-01-218-4144 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Part Alternates: 3825056, 3040-01-218-4144, 01-218-4144, 3040012184144, 012184144

Mechanical Power Transmission Equipment | Miscellaneous Power Transmission Equipment

Supply Group (FSG) NSN Assign. NIIN
30 11 OCT 1985 01-218-4144

Cross Reference | NSN 3040-01-218-4144

Part Number Cage Code Manufacturer
3825056 82577 RAYTHEON COMPANY DBA RAYTHEON

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 3040-01-218-4144

Technical Data | NSN 3040-01-218-4144

Characteristic Specifications
MATERIAL DOCUMENT AND CLASSIFICATION AMS5643 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL STEEL
FIRST END STYLE INTERNAL THREADED
SECOND END TONGUE WIDTH 0.2130 INCHES NOMINAL
FIRST END DIAMETER 0.3120 INCHES MINIMUM AND 0.3140 INCHES MAXIMUM
SECOND END STEP LENGTH 0.3900 INCHES NOMINAL
SPECIAL FEATURES 1ST END NO THREAD TAPER 7DEG TO 0.04 AT END AND PERPENDICULAR;2ND END 0.0955 IN. HOLE THRU 0.18 FROM END
SECOND END STYLE TONGUE ROUNDED ENDS
SECOND END TONGUE THICKNESS 0.1200 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM
SURFACE FINISH 125.0 MICROINCHES
SECOND END DIAMETER 0.2120 INCHES MINIMUM AND 0.2140 INCHES MAXIMUM
FIRST END INTERNAL THREAD LENGTH 0.7700 INCHES NOMINAL
STEP QUANTITY 2
END SIMILARITY NOT IDENTICAL
OVERALL LENGTH 3.780 INCHES NOMINAL
LARGEST STEP DIAMETER 0.313 INCHES NOMINAL

Restrictions/Controls & Freight Information | NSN 3040-01-218-4144

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 126900 POWER TRANS SHAFTING/SHAFTS
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 593 unknown
Originating Activity Code TG Warner-Robins Air Logistics Center
Robins AFB, GA 31098-5609
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity V Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 3040-01-218-4144

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeALTG:ADVANCE MEDIUM RANGE AIR-TO-AIR MISSILE
Price ValidationP The current standard price is the initial negotiated provisioned price.
  • This is the price paid by DoD for the item as the result of price negotiation of the Provisioned Item Order (PIO) or other initial negotiated price.
  • ZOP or Standard Price challenges are permissible but should be supported with adequate justification.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each