NSN 3040-01-116-1311 10106771 , 142D5222, 01-116-1311
Product Details | SHOULDERED SHAFT
3040-01-116-1311 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Part Alternates: 10106771 , 142D5222, 3040-01-116-1311, 01-116-1311, 3040011161311, 011161311
Mechanical Power Transmission Equipment | Miscellaneous Power Transmission Equipment
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | 21 JUL 1981 | 01-116-1311 | 22914 ( SHAFT, SHOULDERED ) |
Drawings & Photos | NSN 3040-01-116-1311
Demand History | NSN 3040-01-116-1311
| Part Number | Request Date | QTY | Origin |
|---|---|---|---|
| 3040-01-116-1311 | 2019-07-182 | 11 | DIBBS |
| 3040-01-116-1311 | 2019-02-44 | 6 | DIBBS |
| 3040-01-116-1311 | 2018-10-274 | 1 | DIBBS |
| 3040-01-116-1311 | 2018-09-263 | 1 | DIBBS |
| 3040-01-116-1311 | 2018-08-221 | 2 | DIBBS |
| 3040-01-116-1311 | 2017-11-323 | 3 | DIBBS |
| 3040-01-116-1311 | 2017-05-124 | 1 | DIBBS |
| 3040-01-116-1311 | 2017-04-117 | 2 | DIBBS |
| 3040-01-116-1311 | 2016-05-124 | 7 | DIBBS |
| 3040-01-116-1311 | 2016-04-119 | 1 | DIBBS |
| 3040-01-116-1311 | 2016-04-108 | 2 | DIBBS |
| 3040-01-116-1311 | 2016-04-98 | 1 | DIBBS |
| 3040-01-116-1311 | 2013-11-328 | 3 | DIBBS |
| 3040-01-116-1311 | 2013-07-210 | 11 | DIBBS |
| 3040-01-116-1311 | 2012-09-263 | 3 | DIBBS |
| 3040-01-116-1311 | 2012-08-228 | 1 | DIBBS |
| 3040-01-116-1311 | 2012-03-73 | 6 | DIBBS |
| 3040-01-116-1311 | 2012-03-72 | 6 | DIBBS |
| 3040-01-116-1311 | 2011-12-347 | 3 | DIBBS |
| 3040-01-116-1311 | 2011-10-280 | 3 | DIBBS |
| 3040-01-116-1311 | 2011-09-273 | 3 | DIBBS |
| 3040-01-116-1311 | 2011-02-34 | 6 | DIBBS |
| 3040-01-116-1311 | 2010-08-216 | 9 | DIBBS |
Cross Reference | NSN 3040-01-116-1311
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 142D5222 | 05606 | GENERAL DYNAMICS-OTS, INC. DBA GD-OTS (WILLISTON) |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
Ernie G.
Honeywell
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
NSNs for Compare ( up to 4 ): Add 3040-01-116-1311
Related Products | NSN 3040-01-116-1311
Technical Data | NSN 3040-01-116-1311
| Characteristic | Specifications |
|---|---|
| MATERIAL | TITANIUM ALLOY |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-9047,COMP 6 MIL SPEC SINGLE MATERIAL RESPONSE |
| FIRST END STYLE | 1 PLAIN |
| FIRST END DIAMETER | 0.3747 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 9 INTERNAL THREADED |
| SECOND END DIAMETER | 0.5898 INCHES NOMINAL |
| SECOND END INTERNAL THREAD LENGTH | 0.600 INCHES MINIMUM |
| LARGEST STEP DIAMETER | 0.690 INCHES NOMINAL |
| OVERALL LENGTH | 6.020 INCHES NOMINAL |
| STEP QUANTITY | 6 |
| SPECIAL FEATURES | SECOND END SPLINED 0.400 IN. LG,17 TEETH,0.4880 IN. MINOR DIA |
| III FSC APPLICATION DATA | FEEDER,AUTOMATIC GUN |
| MANUFACTURERS CODE | 05606 |
| DESIGN CONTROL REFERENCE | 142D5222 |
Restrictions/Controls & Freight Information | NSN 3040-01-116-1311
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | N | There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials |
| Demilitarization Code: | B | Munitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.) |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| NMF Description | 126900 | POWER TRANS SHAFTING/SHAFTS |
| Less than car load rating | ||
| Less than truck load rating | W | Rating Variable |
| Water commodity Code | 593 | unknown |
| Originating Activity Code | KE | Naval ICP Philadelphia, PA 19111 |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | V | Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 3040-01-116-1311
Air Force
Navy| Category | Code | Description |
|---|---|---|
| Budget Code | 9 | General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors. |
| Price Validation | N | The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
|
| Fund Code | SF | Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point. |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DF | Department of the Air Force |
| Service Organization | F | U.S. Air Force |
| Reparability | N | Stock Fund (except Munitions) |
| Acquisition Advice Codes | Z | INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |
| Category | Code | Description |
|---|---|---|
| Cognizance Codes | 3B | Navy-owned stocks of field level repairable DLA material Naval Inventory Control Point, Mechanicsburg |
| Special Material ID | GF | (Non-HSP) FIGHTER SUPPORTAIRCRAFT(F/A-18) |
| Special Material Content | 9 | Non-Hazardous or Non-Sensitive Item, does not require hazardous or special handling, packaging or precautions |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DN | Department of the Navy |
| Service Organization | N | U.S. Navy |
| Reparability | D | Field Level Reparables |
| Acquisition Advice Codes | Z | INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |