NSN 3040-00-752-1019 007521019
Product Details | SHOULDERED SHAFT
3040-00-752-1019 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Part Alternates: 007521019
Vehicular Equipment Components | Vehicular Power Transmission Components
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 25 | 00-752-1019 | 22914 ( SHAFT, SHOULDERED ) |
Drawings & Photos | NSN 2520-00-752-1019
Demand History | NSN 3040-00-752-1019
| Part Number | Request Date | QTY | Origin |
|---|---|---|---|
| 2520-00-752-1019 | 2019-02-35 | 10 | BO |
| 2520-00-752-1019 | 2012-07-200 | 1 | US |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 3040-00-752-1019
Technical Data | NSN 3040-00-752-1019
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-46178 MIL SPEC ALL MATERIAL RESPONSES |
| FIRST END STYLE | 1 PLAIN |
| FIRST END DIAMETER | 1.0908 INCHES MINIMUM AND 1.0913 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 88 TWO CROSS DRILLED HOLES AND EXTERNALLY THREADED |
| SECOND END DIAMETER | 1.0000 INCHES NOMINAL |
| SECOND END HOLE DIAMETER | 0.1410 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.250 INCHES NOMINAL |
| SECOND END EXTERNAL THREAD LENGTH | 0.750 INCHES NOMINAL |
| SECOND END ANGLE BETWEEN HOLES | 90.0 DEGREES NOMINAL |
| LARGEST STEP DIAMETER | 2.426 INCHES NOMINAL |
| OVERALL LENGTH | 17.735 INCHES MINIMUM AND 17.797 INCHES MAXIMUM |
| STEP QUANTITY | 10 |
| MANUFACTURERS CODE | 95019 |
| DESIGN CONTROL REFERENCE | 30-362-11 |
Restrictions/Controls & Freight Information | NSN 3040-00-752-1019
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||