NSN 3040-00-705-7849 007057849
Product Details | SHOULDERED SHAFT
3040-00-705-7849 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Part Alternates: 007057849
Vehicular Equipment Components | Vehicular Power Transmission Components
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 25 | 00-705-7849 | 22914 ( SHAFT, SHOULDERED ) |
Drawings & Photos | NSN 2520-00-705-7849
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 3040-00-705-7849
Technical Data | NSN 3040-00-705-7849
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 1015 |
| FIRST END STYLE | 23 UNTHREADED CROSS DRILLED |
| FIRST END DIAMETER | 1.0000 INCHES MINIMUM AND 1.0005 INCHES MAXIMUM |
| FIRST END HOLE DIAMETER | 0.3693 INCHES MINIMUM AND 0.3708 INCHES MAXIMUM |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 1.468 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 69 FLAT GROOVE AND WOODRUFF KEYWAY |
| SECOND END DISTANCE FROM END TO FLAT | 2.875 INCHES NOMINAL |
| SECOND END KEYWAY WIDTH | 0.1863 INCHES MINIMUM AND 0.1880 INCHES MAXIMUM |
| SECOND END EXTERNAL KEYWAY LENGTH | 0.760 INCHES MINIMUM AND 0.768 INCHES MAXIMUM |
| SECOND END DISTANCE FROM KEYWAY CENTER TO END | 2.438 INCHES NOMINAL |
| SECOND END DIAMETER | 0.9930 INCHES MINIMUM AND 0.9980 INCHES MAXIMUM |
| SECOND END GROOVED FLAT LENGTH | 0.3750 INCHES NOMINAL |
| SECOND END GROOVED FLAT DEPTH | 0.068 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| LARGEST STEP DIAMETER | 1.000 INCHES NOMINAL |
| OVERALL LENGTH | 9.125 INCHES NOMINAL |
| STEP QUANTITY | 1 |
| MANUFACTURERS CODE | 19207 |
| DESIGN CONTROL REFERENCE | 10862349 |
Restrictions/Controls & Freight Information | NSN 3040-00-705-7849
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||