NSN 3040-00-628-7985 539898, 00-628-7985, 006287985
Product Details | SHOULDERED SHAFT
3040-00-628-7985 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Part Alternates: 539898, 3040-00-628-7985, 00-628-7985, 3040006287985, 006287985
Mechanical Power Transmission Equipment | Miscellaneous Power Transmission Equipment
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | 01 JAN 1963 | 00-628-7985 | 22914 ( SHAFT, SHOULDERED ) |
Demand History | NSN 3040-00-628-7985
| Part Number | Request Date | QTY | Origin |
|---|---|---|---|
| 3040-00-628-7985 | 2014-02-44 | 2 | DIBBS |
| 3040-00-628-7985 | 2014-02-35 | 2 | DIBBS |
Cross Reference | NSN 3040-00-628-7985
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 539898 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
Ernie G.
Honeywell
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
NSNs for Compare ( up to 4 ): Add 3040-00-628-7985
Related Products | NSN 3040-00-628-7985
Technical Data | NSN 3040-00-628-7985
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS5610 ASSN STD SINGLE MATERIAL RESPONSE |
| FIRST END GROOVE WIDTH | 0.0900 INCHES MINIMUM AND 0.1000 INCHES MAXIMUM |
| FIRST END GROOVE DIAMETER | 0.2600 INCHES MINIMUM AND 0.2630 INCHES MAXIMUM |
| FIRST END DIAMETER | 0.2500 INCHES NOMINAL |
| FIRST END HOLE DIAMETER | 0.0650 INCHES MINIMUM AND 0.0720 INCHES MAXIMUM |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| FIRST END EXTERNAL THREAD LENGTH | 0.360 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END DISTANCE FROM KEYWAY CENTER TO END | 1.210 INCHES NOMINAL |
| SECOND END DIAMETER | 0.2500 INCHES NOMINAL |
| SECOND END HOLE DIAMETER | 0.0650 INCHES MINIMUM AND 0.0720 INCHES MAXIMUM |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| SECOND END EXTERNAL THREAD LENGTH | 0.360 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.374 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| OVERALL LENGTH | 2.890 INCHES NOMINAL |
| STEP QUANTITY | 7 |
| MANUFACTURERS CODE | 73030 |
| DESIGN CONTROL REFERENCE | 539898 |
Restrictions/Controls & Freight Information | NSN 3040-00-628-7985
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | N | There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | U | Precious metal type is unknown |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| NMF Description | 126900 | POWER TRANS SHAFTING/SHAFTS |
| Less than car load rating | ||
| Less than truck load rating | W | Rating Variable |
| Water commodity Code | 593 | unknown |
| Originating Activity Code | XX | |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | V | Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 3040-00-628-7985
Air Force
Navy| Category | Code | Description |
|---|---|---|
| Budget Code | 9 | General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors. |
| Price Validation | A | The standard price is being analyzed.
|
| Materiel Management Aggregation Code | PP | TG:PROPELLER SYSTEMS |
| Fund Code | SF | Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point. |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DF | Department of the Air Force |
| Service Organization | F | U.S. Air Force |
| Reparability | N | Stock Fund (except Munitions) |
| Acquisition Advice Codes | H | DIRECT DELIVERY UNDER A CENTRAL CONTRACT # (VENDOR STOCKED) Issue, transfer or shipment is not subject to specialized controls other than those imposed by IMM/Service/Agency supply policy. 1. The item is centrally managed and procured. 2. Normal issue is by direct shipment from the vendor to the user at the order of the ICP or IMM. However, orders may be shipped from stock by ICP or IMM distribution facilities when the vendor's minimum order quantity is not met, or when stocks are being drawn down. 3. Requisitions and fund citations will be submitted in accordance with IMM/Service/Agency Requisitioning Procedures. 4. Generally delivery will be made within applicable Service/Agency guidelines addressing customer required timeframe. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |
| Category | Code | Description |
|---|---|---|
| Cognizance Codes | 9B | Navy-owned stocks of DLA material Naval Inventory Control Point, Mechanicsburg |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DN | Department of the Navy |
| Service Organization | N | U.S. Navy |
| Acquisition Advice Codes | H | DIRECT DELIVERY UNDER A CENTRAL CONTRACT # (VENDOR STOCKED) Issue, transfer or shipment is not subject to specialized controls other than those imposed by IMM/Service/Agency supply policy. 1. The item is centrally managed and procured. 2. Normal issue is by direct shipment from the vendor to the user at the order of the ICP or IMM. However, orders may be shipped from stock by ICP or IMM distribution facilities when the vendor's minimum order quantity is not met, or when stocks are being drawn down. 3. Requisitions and fund citations will be submitted in accordance with IMM/Service/Agency Requisitioning Procedures. 4. Generally delivery will be made within applicable Service/Agency guidelines addressing customer required timeframe. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |