NSN 3040-00-554-8035 5548035, 00-554-8035, 005548035
Product Details | SHOULDERED SHAFT
3040-00-554-8035 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Part Alternates: 5548035, 3040-00-554-8035, 00-554-8035, 3040005548035, 005548035
Mechanical Power Transmission Equipment | Miscellaneous Power Transmission Equipment
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | 01 JAN 1963 | 00-554-8035 | 22914 ( SHAFT, SHOULDERED ) |
Drawings & Photos | NSN 3040-00-554-8035
Demand History | NSN 3040-00-554-8035
| Part Number | Request Date | QTY | Origin |
|---|---|---|---|
| 3040-00-554-8035 | 2020-12-345 | 14 | DIBBS |
| 3040-00-554-8035 | 2019-11-325 | 30 | DIBBS |
| 3040-00-554-8035 | 2018-07-207 | 5 | DIBBS |
| 3040-00-554-8035 | 2017-08-243 | 5 | DIBBS |
| 3040-00-554-8035 | 2017-02-40 | 6 | DIBBS |
| 3040-00-554-8035 | 2016-09-263 | 6 | DIBBS |
| 3040-00-554-8035 | 2016-09-251 | 6 | DIBBS |
| 3040-00-554-8035 | 2016-08-231 | 5 | DIBBS |
| 3040-00-554-8035 | 2015-12-351 | 1 | DIBBS |
| 3040-00-554-8035 | 2014-09-267 | 3 | DIBBS |
| 3040-00-554-8035 | 2012-11-320 | 6 | DIBBS |
| 3040-00-554-8035 | 2012-08-229 | 6 | DIBBS |
| 3040-00-554-8035 | 2009-11-311 | 6 | DIBBS |
| 3040-00-554-8035 | 2009-01-30 | 9 | DIBBS |
Cross Reference | NSN 3040-00-554-8035
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 5548035 | 19204 | ARMY UNITED STATES DEPARTMENT OF THE |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
Ernie G.
Honeywell
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
NSNs for Compare ( up to 4 ): Add 3040-00-554-8035
Related Products | NSN 3040-00-554-8035
Technical Data | NSN 3040-00-554-8035
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 4140 |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END STYLE | 44 EXTERNALLY AND INTERNALLY THREADED |
| FIRST END DIAMETER | 1.6250 INCHES NOMINAL |
| FIRST END EXTERNAL THREAD LENGTH | 1.000 INCHES NOMINAL |
| FIRST END INTERNAL THREAD LENGTH | 0.625 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 75 CIRCULAR GROOVE, TWO CROSS DRILLED HOLES AND EXTERNALLY THREADED |
| SECOND END GROOVE WIDTH | 0.1250 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 1.0200 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 3.063 INCHES NOMINAL |
| SECOND END DIAMETER | 1.2800 INCHES NOMINAL |
| SECOND END HOLE DIAMETER | 0.1880 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.188 INCHES NOMINAL |
| SECOND END EXTERNAL THREAD LENGTH | 3.057 INCHES NOMINAL |
| SECOND END ANGLE BETWEEN HOLES | 90.0 DEGREES NOMINAL |
| LARGEST STEP DIAMETER | 1.625 INCHES NOMINAL |
| OVERALL LENGTH | 58.375 INCHES NOMINAL |
| STEP QUANTITY | 9 |
| MANUFACTURERS CODE | 19204 |
| DESIGN CONTROL REFERENCE | 5548035 |
Restrictions/Controls & Freight Information | NSN 3040-00-554-8035
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | N | There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| NMF Description | 126900 | POWER TRANS SHAFTING/SHAFTS |
| Less than car load rating | ||
| Less than truck load rating | W | Rating Variable |
| Water commodity Code | 593 | unknown |
| Originating Activity Code | XX | |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | V | Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 3040-00-554-8035
Army
Marines| Category | Code | Description |
|---|---|---|
| Materiel Category and Inventory Manager | J | Ground Forces Support Materiel (DLA/GSA Items) |
| Appropriation and Budget Activity | 2 | Stock Fund Secondary Items |
| Management Inventory Segment | 2 | NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable. |
| Specific Group/Generic Code | G | Artillery |
| Weapons Systems/End Item or Homogeneous Group | GB | Howitzer, 105-mm, M101/M101A1 |
| Accounting Requirements Code | X | Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items. |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DA | Department of the Army |
| Service Organization | A | U.S. Army |
| Reparability | Z | This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Acquisition Advice Codes | V | TERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |
| Category | Code | Description |
|---|---|---|
| Stores Account Code | 1 | Marine Corps Stock Fund Account Item. |
| Combat Essentiality Code | 5 | Critical Repair Part to a Combat Essential End Item. Those parts or components whose failure in a combat essential end item will render the end item inoperative or reduce its effectiveness below the minimum acceptable level of efficiency. |
| Materiel Management Code | B | All CommoditiesDefense Logistics Agency, (DLA,) |
| Echelon Management Code | 2 | ICP/DSSC Marine Corps-managed Recoverability Code D items and Defense Logistics Agency (DLA)/TACOM/GSA) items which the integrated manager has not decontrolled. |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DM | U.S. Marine Corps |
| Service Organization | M | U.S. Marine Corps |
| Reparability | Z | Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code. |
| Acquisition Advice Codes | Z | INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |