NSN 3040-00-463-7485 9850012P001, 9850012P1, 00-463-7485
Product Details | SHOULDERED SHAFT
3040-00-463-7485 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Part Alternates: 9850012P001, 9850012P1, 3040-00-463-7485, 00-463-7485, 3040004637485, 004637485
Mechanical Power Transmission Equipment | Miscellaneous Power Transmission Equipment
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | 01 JAN 1961 | 00-463-7485 | 22914 ( SHAFT, SHOULDERED ) |
Drawings & Photos | NSN 3040-00-463-7485
Demand History | NSN 3040-00-463-7485
| Part Number | Request Date | QTY | Origin |
|---|---|---|---|
| 9850012P001 | 2024-07-193 | 59 | DIBBS |
| 9850012P001 | 2023-08-226 | 83 | DIBBS |
| 9850012P001 | 2023-08-215 | 83 | DIBBS |
| 9850012P001 | 2023-04-110 | 194 | DIBBS |
| 9850012P001 | 2023-04-99 | 194 | DIBBS |
| 9850012P001 | 2023-02-54 | 45 | DIBBS |
| 9850012P001 | 2022-04-101 | 61 | DIBBS |
| 9850012P001 | 2020-11-324 | 68 | DIBBS |
| 9850012P001 | 2019-08-231 | 72 | DIBBS |
| 9850012P001 | 2019-05-133 | 72 | DIBBS |
| 9850012P001 | 2019-05-121 | 72 | DIBBS |
| 3040-00-463-7485 | 2016-07-213 | 134 | DIBBS |
| 3040-00-463-7485 | 2014-12-348 | 114 | DIBBS |
| 3040-00-463-7485 | 2014-07-212 | 105 | DIBBS |
| 3040-00-463-7485 | 2013-12-338 | 88 | DIBBS |
| 3040-00-463-7485 | 2013-11-323 | 88 | DIBBS |
| 3040-00-463-7485 | 2013-10-291 | 58 | DIBBS |
| 3040-00-463-7485 | 2013-04-99 | 39 | DIBBS |
| 3040-00-463-7485 | 2013-02-58 | 33 | DIBBS |
| 3040-00-463-7485 | 2013-02-36 | 24 | DIBBS |
| 3040-00-463-7485 | 2012-12-339 | 19 | DIBBS |
| 3040-00-463-7485 | 2012-10-296 | 27 | DIBBS |
| 9850012P001 | 2007-04-92 | 10 | Australia |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 3040-00-463-7485
Technical Data | NSN 3040-00-463-7485
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 303 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 303 FED SPEC SINGLE MATERIAL RESPONSE |
| FIRST END STYLE | 2 TAPERED WITH FLAT |
| FIRST END TAPER LENGTH | 0.180 INCHES NOMINAL |
| FIRST END FLAT LENGTH | 0.180 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 5 CIRCULAR GROOVED |
| SECOND END GROOVE WIDTH | 0.0180 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.1600 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM |
| SECOND END DISTANCE FROM END TO GROOVE | 0.0175 INCHES NOMINAL |
| SECOND END DIAMETER | 0.1870 INCHES MINIMUM AND 0.1873 INCHES MAXIMUM |
| III END ITEM IDENTIFICATION | C141 ACFT |
| III FSC APPLICATION DATA | TRANSMITTER,RATE OF FLOW |
Restrictions/Controls & Freight Information | NSN 3040-00-463-7485
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | N | There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials |
| Demilitarization Code: | Q | Strategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.” |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| NMF Description | 126900 | POWER TRANS SHAFTING/SHAFTS |
| Less than car load rating | ||
| Less than truck load rating | W | Rating Variable |
| Water commodity Code | 593 | unknown |
| Originating Activity Code | XX | |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | V | Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 3040-00-463-7485
Air Force| Category | Code | Description |
|---|---|---|
| Budget Code | 9 | General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors. |
| Price Validation | N | The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
|
| Materiel Management Aggregation Code | NT | SX:AIRCRAFT INSTRUMENTS |
| Fund Code | SF | Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point. |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DF | Department of the Air Force |
| Service Organization | F | U.S. Air Force |
| Reparability | N | Stock Fund (except Munitions) |
| Acquisition Advice Codes | D | DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |