Product Details | SHOULDERED SHAFT

3040-00-014-1879 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Part Alternates: 31016092, 31-01609-2, 3040-00-014-1879, 00-014-1879, 3040000141879, 000141879

Mechanical Power Transmission Equipment | Miscellaneous Power Transmission Equipment

Supply Group (FSG) NSN Assign. NIIN
30 01 JAN 1961 00-014-1879

Drawings & Photos | NSN 3040-00-014-1879


Demand History | NSN 3040-00-014-1879

Part Number Request Date QTY Origin
3040-00-014-1879 2007-12-338 18 DIBBS
3040-00-014-1879 2007-10-284 8 DIBBS
3040-00-014-1879 2007-09-261 3 DIBBS

Cross Reference | NSN 3040-00-014-1879

Part Number Cage Code Manufacturer
31-01609-2 72914 GRIMES AEROSPACE COMPANY DBA HONEYWELL

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 3040-00-014-1879

Technical Data | NSN 3040-00-014-1879

Characteristic Specifications
MATERIAL STEEL
SURFACE FINISH 16.0 MICROINCHES
FIRST END STYLE 1 PLAIN
FIRST END DIAMETER 0.2495 INCHES NOMINAL
END SIMILARITY NOT IDENTICAL
SECOND END STYLE 18 SPLINED
SECOND END DIAMETER 0.3100 INCHES NOMINAL
SECOND END SPLINE LENGTH 0.120 INCHES NOMINAL
SECOND END SPLINE MINOR DIAMETER 0.2660 INCHES NOMINAL
SECOND END SPLINE MAJOR DIAMETER 0.3235 INCHES NOMINAL
SECOND END PITCH DIAMETER 0.2880 INCHES NOMINAL
SECOND END PRESSURE ANGLE 30.0000 DEGREES NOMINAL
SECOND END SPLINE QUANTITY 26
LARGEST STEP DIAMETER 0.500 INCHES NOMINAL
OVERALL LENGTH 4.156 INCHES NOMINAL
STEP QUANTITY 2
III FSC APPLICATION DATA VALVE,FUEL SHUTOFF
MANUFACTURERS CODE 72914
DESIGN CONTROL REFERENCE 31-01609-2

Restrictions/Controls & Freight Information | NSN 3040-00-014-1879

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 126900 POWER TRANS SHAFTING/SHAFTS
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 593 unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity V Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 3040-00-014-1879

Category Code Description
Materiel Category and Inventory ManagerJ Ground Forces Support Materiel (DLA/GSA Items)
Appropriation and Budget Activity2 Stock Fund Secondary Items
Management Inventory Segment2 NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable.
Specific Group/Generic Code0 Medical Materiel
Weapons Systems/End Item or Homogeneous Group00DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
Accounting Requirements CodeX Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDADepartment of the Army
Service OrganizationAU.S. Army
ReparabilityZThis is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item.
Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each