Product Details | UNIVERSAL JOINT YOKE

3010-00-166-7977 INC 17654 CANCELLED/REPLACED BY ,INC 52120, FIIG A522J0, APP-KEY ,INC 52119, FIIG A522J0, APP-KEY , ON 041996 A component of a UNIVERSAL JOINT which is designed to accommodate or include a Spider, block and/or pin(s) of a UNIVERSAL JOINT. The opposite end must have either a flange, hub or splined stub shaft which is designed to be attached to a driving or driven member. For items with a shaft, the length from the end of the shaft to the center of the cross pin, block or Spider bearing accommodations shall not exceed twice the length of the splines. See also PROPELLER SHAFT.20225200039Vehicular Power Transmission Components30400042Miscellaneous Power Transmission Equipment

Part Alternates: 001667977

Weapons | Guns, through 30mm

Supply Group (FSG) NSN Assign. NIIN
10 13-NOV-71 00-166-7977

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 3010-00-166-7977

Technical Data | NSN 3010-00-166-7977

Characteristic Specifications
FORK DEPTH 1.782 INCHES NOMINAL
CONNECTION END TYPE HUB
CRITICALITY CODE JUSTIFICATION AAZR
COGNIZANT SERVICE USN
HUB BORE INCLUDED
UNABLE TO DECODE UNABLE TO DECODE
LENGTH ACROSS FLATS 3.180 INCHES NOMINAL
FORK HEIGHT 12.950 INCHES NOMINAL
PROTECTOR TYPE ANY ACCEPTABLE
UNIVERSAL JOINT SPIDER NOT INCLUDED
FORK WIDTH 8.895 INCHES NOMINAL
OUTSIDE SHAPE RECTANGULAR
LENGTH FROM UNIVERSAL JOINT SPIDER CENTERLINE TO HUB END 3.636 INCHES NOMINAL
END ITEM IDENTIFICATION AIRCRAFT MODEL F-14A
UNABLE TO DECODE UNABLE TO DECODE
WIDTH ACROSS FLATS 3.200 INCHES NOMINAL
BEARING HOLE DIAMETER 0.8122 INCHES MINIMUM AND 0.8127 INCHES MAXIMUM
OUTER PERIPHERY MACHINED SURFACE FINISH INCLUDED
SPLIT HUB FEATURE NOT INCLUDED
HUB MACHINED SURFACE FINISH OUTSIDE LENGTH 3.200 INCHES NOMINAL
HUB SECURING HOLE NOT INCLUDED
HUB END THREAD PROVISION UNTHREADED
MAJOR DIAMETER 2.2520 INCHES MINIMUM AND 2.2525 INCHES MAXIMUM

Restrictions/Controls & Freight Information | NSN 3010-00-166-7977

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:YThe item does not have a nuclear hardened feature but does have other critical feature(s) such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information