Product Details | FLUID FILTER ELEMENT

2945-01-202-6541 A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.20916500058Aircraft Hydraulic, Vacuum, and De-icing System Components29100042Engine Fuel System Components, Nonaircraft29150064Engine Fuel System Components, Aircraft and Missile Prime Movers29400064Engine Air and Oil Filters, Strainers, and Cleaners, Nonaircraft29450059Engine Air and Oil Filters, Cleaners, Aircraft Prime Moving43300057Centrifugals, Separators, and Pressure and Vacuum Filters5999000065300053Hospital Furniture, Equipment, Utensils, and Supplies66300029Chemical Analysis Instruments

Part Alternates: ACA602F74Y3, AC-A602F-74Y3, RG351792, RG35179-2, 9339M25P04, 2945-01-202-6541, 01-202-6541, 2945012026541, 012026541

Engine Accessories | Engine Air and Oil Filters, Cleaners, Aircraft Prime Moving

Supply Group (FSG) NSN Assign. NIIN
29 05 MAR 1985 01-202-6541

Drawings & Photos | NSN 2945-01-202-6541


Demand History | NSN 2945-01-202-6541

Part Number Request Date QTY Origin
AC-A602F-74Y3 2024-06-176 103 DIBBS
AC-A602F-74Y3 2024-02-51 160 DIBBS
2945-01-202-6541 2020-12-365 1 DIBBS-RFPs
2945-01-202-6541 2017-11-305 1 DIBBS-RFPs
2945-01-202-6541 2016-11-319 564 DIBBS
2945-01-202-6541 2016-07-200 2473 DIBBS
2945-01-202-6541 2016-06-178 1367 DIBBS
2945-01-202-6541 2016-05-137 85 DIBBS
9339M25P04 2015-03-78 6 US
2945-01-202-6541 2015-02-55 331 DIBBS
2945-01-202-6541 2015-02-34 50 MANUAL
2945-01-202-6541 2014-11-306 334 DIBBS
2945-01-202-6541 2014-08-218 201 DIBBS
2945-01-202-6541 2014-08-215 401 DIBBS
2945-01-202-6541 2014-07-203 323 DIBBS
2945-01-202-6541 2014-07-182 227 DIBBS
2945-01-202-6541 2014-05-139 101 DIBBS
2945-01-202-6541 2013-05-136 1528 DIBBS
2945-01-202-6541 2013-05-128 1528 DIBBS
2945-01-202-6541 2011-12-342 727 DIBBS
2945-01-202-6541 2010-06-159 1515 DIBBS
2945-01-202-6541 2010-05-144 1515 DIBBS
2945-01-202-6541 2010-03-68 786 DIBBS
2945-01-202-6541 2009-05-127 1295 DIBBS
2945-01-202-6541 2009-01-06 1024 DIBBS
2945-01-202-6541 2008-12-350 1024 DIBBS
2945-01-202-6541 2007-12-340 1263 DIBBS
2945-01-202-6541 2007-06-160 584 DIBBS

Cross Reference | NSN 2945-01-202-6541

Part Number Cage Code Manufacturer
9339M25P04 07482 GENERAL ELECTRIC COMPANY DBA GE
AC-A602F-74Y3 18350 PALL AEROPOWER CORPORATION
RG35179-2 51663 CRANE CO. DBA LEAR ROMEC
RG35179-2 94592 FLUID CONDITIONING PRODUCTS, INC.

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 2945-01-202-6541

Technical Data | NSN 2945-01-202-6541

Characteristic Specifications
STYLE DESIGNATOR A6 CYLINDRICAL W/OUT CONTAINER
BODY DIAMETER 2.125 INCHES NOMINAL
BODY INSIDE DIAMETER 0.814 INCHES NOMINAL
BODY OVERALL LENGTH 2.015 INCHES NOMINAL
MATERIAL STEEL COMP 304L BODY
MATERIAL DOCUMENT AND CLASSIFICATION QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE BODY
DESIGN TYPE REUSABLE
MEDIA FOR WHICH DESIGNED FUEL/OIL, HYDROCARBON
III FSC APPLICATION DATA MISCELLANEOUS ENGINE ACCESSORIES,AIRCRAFT
MANUFACTURERS CODE 07482
MFR SOURCE CONTROLLING REFERENCE 9339M25P04

Restrictions/Controls & Freight Information | NSN 2945-01-202-6541

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:FThe item is an Aviation Critical Safety Item/Flight Safety Critical Aircraft Part ((ACSI/FSCAP).
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 069100 FILTERS:CARTRIDGES/ELEMENTS
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 671 unknown
Originating Activity Code SX Oklahoma City Air Logistics Center
Tinker AFB, OK 73145-3043
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity V Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 2945-01-202-6541

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Materiel Management Aggregation CodePRSX:F11O GE 100 ENGINE
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesHDIRECT DELIVERY UNDER A CENTRAL CONTRACT # (VENDOR STOCKED) Issue, transfer or shipment is not subject to specialized controls other than those imposed by IMM/Service/Agency supply policy. 1. The item is centrally managed and procured. 2. Normal issue is by direct shipment from the vendor to the user at the order of the ICP or IMM. However, orders may be shipped from stock by ICP or IMM distribution facilities when the vendor's minimum order quantity is not met, or when stocks are being drawn down. 3. Requisitions and fund citations will be submitted in accordance with IMM/Service/Agency Requisitioning Procedures. 4. Generally delivery will be made within applicable Service/Agency guidelines addressing customer required timeframe.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesHDIRECT DELIVERY UNDER A CENTRAL CONTRACT # (VENDOR STOCKED) Issue, transfer or shipment is not subject to specialized controls other than those imposed by IMM/Service/Agency supply policy. 1. The item is centrally managed and procured. 2. Normal issue is by direct shipment from the vendor to the user at the order of the ICP or IMM. However, orders may be shipped from stock by ICP or IMM distribution facilities when the vendor's minimum order quantity is not met, or when stocks are being drawn down. 3. Requisitions and fund citations will be submitted in accordance with IMM/Service/Agency Requisitioning Procedures. 4. Generally delivery will be made within applicable Service/Agency guidelines addressing customer required timeframe.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each