NSN 2530-00-801-1726 507105, 00-801-1726, 008011726
Product Details | BALL STUD ADJUSTING PLUG
2530-00-801-1726 A headless, externally threaded item usually slotted in one end to facilitate turning and to accommodate a locking device. The opposite end may be flat, concave or drilled to mate with a tension spring, bearing, ball or ball seat. It is designed to adjust tension and secure in position the ball stud of a steering tie rod end, drag link end and/or other connectors of this type.
Part Alternates: 507105, 2530-00-801-1726, 00-801-1726, 2530008011726, 008011726
Vehicular Equipment Components | Vehicular Brake, Steering, Axle, Wheel, and Track Components
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 25 | 01 JAN 1962 | 00-801-1726 | 18541 ( PLUG, ADJUSTING, BALL STUD ) |
Cross Reference | NSN 2530-00-801-1726
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 507105 | 26101 | TRIUMPH GROUP OPERATIONS, INC., THE DBA TRIUMPH ACCESSORY SERVICES |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 2530-00-801-1726
Technical Data | NSN 2530-00-801-1726
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| BALL SEAT END CHARACTERISTIC | CONCAVE |
| SPHERICAL RADIUS | 0.250 INCHES NOMINAL |
| OVERALL LENGTH | 1.000 INCHES NOMINAL |
| THREAD SIZE AND SERIES/TYPE DESIGNATOR | 5/16-24 UNF |
| THREAD DIRECTION | RIGHT-HAND |
| SLOT WIDTH | 0.062 INCHES NOMINAL |
| SLOT DEPTH | 0.062 INCHES NOMINAL |
| LUBRICATION FITTING THREADED HOLE | NOT INCLUDED |
| III FSC APPLICATION DATA | REGUATOR,AIR PRESSURE,AIRCRAFT |
| MANUFACTURERS CODE | 26101 |
| DESIGN CONTROL REFERENCE | 507105 |
Restrictions/Controls & Freight Information | NSN 2530-00-801-1726
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | B | Munitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.) |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| NMF Description | 093600 | BRACKETS/BUSHINGS/JOINTS/MOUNTS ETC |
| Less than car load rating | Q | 70 |
| Less than truck load rating | Q | 70.0 |
| Water commodity Code | 713 | unknown |
| Originating Activity Code | XX | |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | ||
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |