NSN 2530-00-741-1432 2280038, 7411432, 00-741-1432
Product Details | DIRT AND LIQUID DEFLECTOR
2530-00-741-1432 An item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part. May or may not be a mechanical device.21516150056Helicopter Rotor Blades, Drive Mechanisms and Components16600062Aircraft Air Conditioning, Heating, and Pressurizing Equipment16800049Miscellaneous Aircraft Accessories and Components25200039Vehicular Power Transmission Components25300060Vehicular Brake, Steering, Axle, Wheel, and Track Components25400035Vehicular Furniture and Accessories28050063Gasoline Reciprocating Engines, Except Aircraft; and Components28150029Diesel Engines and Components28250029Steam Turbines and Components28350096Gas Turbines and Jet Engines; Non-Aircraft Prime Mover, Aircraft Non-Prime Mover, and Components29950042Miscellaneous Engine Accessories, Aircraft43100028Compressors and Vacuum Pumps43200020Power and Hand Pumps49300041Lubrication and Fuel Dispensing Equipment53400020Hardware, Commercial
Part Alternates: 2280038, 7411432, 2530-00-741-1432, 00-741-1432, 2530007411432, 007411432
Vehicular Equipment Components | Vehicular Brake, Steering, Axle, Wheel, and Track Components
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
25 | 01 JAN 1963 | 00-741-1432 | 10255 ( DEFLECTOR, DIRT AND LIQUID ) |
Request a Quote
What Our Customers Say
Compare
Related Products | NSN 2530-00-741-1432
Technical Data | NSN 2530-00-741-1432
Characteristic | Specifications |
---|---|
INSIDE DIAMETER | 5.125 INCHES NOMINAL |
STEP DIAMETER | 5.375 INCHES NOMINAL |
OUTSIDE DIAMETER | 14.525 INCHES NOMINAL |
MATERIAL THICKNESS | 0.059 INCHES NOMINAL |
BODY LENGTH | 1.250 INCHES NOMINAL |
MATERIAL | STEEL |
MOUNTING HOLE TYPE | PLAIN |
MOUNTING HOLE QUANTITY | 18 |
MOUNTING HOLE DIAMETER | 0.505 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
BOLT CIRCLE DIAMETER | 13.630 INCHES NOMINAL |
ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 20.0 |
MANUFACTURERS CODE | 23862 |
DESIGN CONTROL REFERENCE | 2280038 |
Restrictions/Controls & Freight Information | NSN 2530-00-741-1432
Category | Code | Description |
---|---|---|
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Demilitarization Code: | B | Munitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.) |
Precious Metals Indicator Code: | U | Precious metal type is unknown |
Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
Category | Code | Description |
---|---|---|
NMF Description | 018400 | AUTO BRAKES/SHOES R PADS ETC |
Less than car load rating | Q | 70 |
Less than truck load rating | Q | 70.0 |
Water commodity Code | 581 | unknown |
Originating Activity Code | XX | |
Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
Air Commodity | V | Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above. |
Air Special Handling | Z | No special handling required. |
Special Handling Code | 9 | unknonwn |
HAZMAT | ||
Type of Cargo | Z | No special type of cargo code applicable |