NSN 2530-00-737-3861 112P11, 150090, 323189
Product Details | BALL STUD ADJUSTING PLUG
2530-00-737-3861 A headless, externally threaded item usually slotted in one end to facilitate turning and to accommodate a locking device. The opposite end may be flat, concave or drilled to mate with a tension spring, bearing, ball or ball seat. It is designed to adjust tension and secure in position the ball stud of a steering tie rod end, drag link end and/or other connectors of this type.
Part Alternates: 112P11, 150090, 323189, 2530-00-737-3861, 00-737-3861, 2530007373861, 007373861
Vehicular Equipment Components | Vehicular Brake, Steering, Axle, Wheel, and Track Components
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
25 | 01 JAN 1961 | 00-737-3861 | 18541 ( PLUG, ADJUSTING, BALL STUD ) |
Request a Quote
What Our Customers Say
Compare
NSNs for Compare ( up to 4 ): Add 2530-00-737-3861
Related Products | NSN 2530-00-737-3861
Technical Data | NSN 2530-00-737-3861
Characteristic | Specifications |
---|---|
MATERIAL | STEEL |
BALL SEAT END CHARACTERISTIC | FLAT AND DRILLED |
DIAMETER | 0.5625 INCHES MINIMUM AND 0.5627 INCHES MAXIMUM |
DEPTH | 0.438 INCHES NOMINAL |
OVERALL LENGTH | 1.125 INCHES NOMINAL |
THREAD SIZE AND SERIES/TYPE DESIGNATOR | 1-13/16 - 18,1.7734 IN. MIN,1.7764 IN. MAX PITCH DIA |
THREAD DIRECTION | RIGHT-HAND |
SLOT WIDTH | 0.313 INCHES NOMINAL |
SLOT DEPTH | 0.625 INCHES NOMINAL |
LUBRICATION FITTING THREADED HOLE | NOT INCLUDED |
Restrictions/Controls & Freight Information | NSN 2530-00-737-3861
Category | Code | Description |
---|---|---|
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
Precious Metals Indicator Code: | A | Item does not contain precious metal |
Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
Category | Code | Description |
---|---|---|
NMF Description | 093750 | BUNGS/PLUGS NOI IN PKGS |
Less than car load rating | W | Rating Variable |
Less than truck load rating | W | Rating Variable |
Water commodity Code | 713 | unknown |
Originating Activity Code | XX | |
Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
Air Commodity | B | Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials. |
Air Special Handling | Z | No special handling required. |
Special Handling Code | 9 | unknonwn |
HAZMAT | ||
Type of Cargo | Z | No special type of cargo code applicable |