Product Details | PROPELLER SHAFT WITH UNIVERSAL J

2520-00-847-0513 A vehicular item with a universal joint on one or both ends. For items with one universal joint, the opposite end may have a yoke, a yoke with a spider, or a shaft. For items without a universal joint see PROPELLER SHAFT (as modified).

Part Alternates: 008470513

Vehicular Equipment Components | Vehicular Power Transmission Components

Supply Group (FSG) NSN Assign. NIIN
25 30 DEC 1966 00-847-0513

Cross Reference | NSN 2520-00-847-0513

Part Number Cage Code Manufacturer
114898A 04627 NACCO MATERIALS HANDLING GROUP INC
114898A 30076 NACCO MATERIALS HANDLING GROUP INC DBA HYSTER

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 2520-00-847-0513

Technical Data | NSN 2520-00-847-0513

Characteristic Specifications
SHAFT LENGTH 6.750 INCHES NOMINAL
MOUNTING HOLE DIAMETER 0.318 NOMINAL INCHES
UNABLE TO DECODE UNABLE TO DECODE
SECURING HOLE LOCATION 90 DEG FROM KEYWAY AND 0.488 IN. FROM HUB END
OVERALL WIDTH 2.795 INCHES NOMINAL
DISTANCE FROM CENTERLINE TO KEYING FACILITY 0.475 INCHES NOMINAL
MAJOR DIAMETER 0.750 NOMINAL INCHES
HUB BORE INCLUDED
LENGTH FROM UNIVERSAL JOINT SPIDER CENTERLINE TO FLANGE OUTER FACE 1.201 INCHES NOMINAL
PILOT DIAMETER 2.250 INCHES NOMINAL
UNIVERSAL JOINT CONNECTION END TYPE FLANGE
UNIVERSAL JOINT CONNECTION END TYPE HUB
UNABLE TO DECODE UNABLE TO DECODE
SCREW THREAD SERIES DESIGNATOR UNC
WIDTH 0.182 INCHES NOMINAL
FLANGE STYLE E2
SECURING HOLE THREAD SIZE DESIGNATOR 5/16-18
OVERALL HEIGHT 2.480 INCHES NOMINAL
SAFETY CLUTCH NOT INCLUDED
OUTSIDE DIAMETER 1.400 INCHES NOMINAL
SECOND CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES 2.105 INCHES NOMINAL
SECURING HOLE QUANTITY 1
UNABLE TO DECODE UNABLE TO DECODE
LENGTH FROM UNIVERSAL JOINT SPIDER CENTERLINE TO HUB END 1.772 INCHES NOMINAL
SHAFT DIAMETER 0.875 INCHES NOMINAL
FIRST CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES 1.765 INCHES NOMINAL
KEYING FACILITY QUANTITY 1
SPLIT HUB FEATURE NOT INCLUDED
UNIVERSAL JOINT STYLE C7
OUTER PERIPHERY MACHINED SURFACE FINISH NOT INCLUDED
HUB SECURING HOLE INCLUDED

Restrictions/Controls & Freight Information | NSN 2520-00-847-0513

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 133300 MACHINERY/MACHINES NOI
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 885 unknown
Originating Activity Code TG Warner-Robins Air Logistics Center
Robins AFB, GA 31098-5609
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity V Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable