Product Details | COMPRESSION CUP

2520-00-753-9747 A nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

Part Alternates: 007539747

Vehicular Equipment Components | Vehicular Power Transmission Components

Supply Group (FSG) NSN Assign. NIIN
25 00-753-9747

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 2520-00-753-9747

Technical Data | NSN 2520-00-753-9747

Characteristic Specifications
OVERALL LENGTH 0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM
OVERALL DIAMETER 17.133 INCHES MINIMUM AND 17.495 INCHES MAXIMUM
CENTER HOLE DIAMETER 16.891 INCHES MINIMUM AND 17.233 INCHES MAXIMUM
BASE MATERIAL THICKNESS 0.096 INCHES MINIMUM AND 0.106 INCHES MAXIMUM
RECESS MAJOR INSIDE DIAMETER 17.100 INCHES MINIMUM AND 17.452 INCHES MAXIMUM
FEATHER EDGE ANGLE 15.0 DEGREES NOMINAL
III FSC APPLICATION DATA SERVO,TRANSMISSION,VEHICULAR

Restrictions/Controls & Freight Information | NSN 2520-00-753-9747

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Category Code Description
No Freight Information