NSN 2520-00-752-2365 007522365
Product Details | SHOULDERED SHAFT
2520-00-752-2365 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Part Alternates: 007522365
Vehicular Equipment Components | Vehicular Power Transmission Components
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 25 | 00-752-2365 | 22914 ( SHAFT, SHOULDERED ) |
Drawings & Photos | NSN 2520-00-752-2365
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 2520-00-752-2365
Technical Data | NSN 2520-00-752-2365
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 1020 OR STEEL COMP 1030 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC ALL MATERIAL RESPONSES |
| FIRST END STYLE | 11 UNTHREADED CROSS DRILLED |
| FIRST END DIAMETER | 0.6220 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM |
| FIRST END HOLE DIAMETER | 0.3120 INCHES MINIMUM AND 0.3140 INCHES MAXIMUM |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 0.458 INCHES MINIMUM AND 0.478 INCHES MAXIMUM |
| FIRST END HOLE DEPTH | 0.622 INCHES MINIMUM AND 0.624 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 13 SQUARE |
| SECOND END DIAMETER | 0.6692 INCHES MINIMUM AND 0.6695 INCHES MAXIMUM |
| SECOND END WIDTH ACROSS FLATS | 0.435 INCHES MINIMUM AND 0.437 INCHES MAXIMUM |
| SECOND END STEP LENGTH | 0.875 INCHES MINIMUM AND 0.937 INCHES MAXIMUM |
| LARGEST STEP DIAMETER | 0.8125 INCHES NOMINAL |
| OVERALL LENGTH | 5.250 INCHES NOMINAL |
| STEP QUANTITY | 6 |
| SPECIAL FEATURES | INTERNAL THREAD ON SECOND END IS 1/4-28NF-3; |
| MANUFACTURERS CODE | 19207 |
| DESIGN CONTROL REFERENCE | 7522365 |
Restrictions/Controls & Freight Information | NSN 2520-00-752-2365
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||