NSN 2520-00-752-1019 007521019
Product Details | SHOULDERED SHAFT
2520-00-752-1019 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Part Alternates: 007521019
Vehicular Equipment Components | Vehicular Power Transmission Components
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
25 | 00-752-1019 | 22914 ( SHAFT, SHOULDERED ) |
Demand History | NSN 2520-00-752-1019
Part Number | Request Date | QTY | Origin |
---|---|---|---|
2520-00-752-1019 | 2019-02-35 | 10 | BO |
2520-00-752-1019 | 2012-07-200 | 1 | US |
Request a Quote
What Our Customers Say
Compare
Related Products | NSN 2520-00-752-1019
Technical Data | NSN 2520-00-752-1019
Characteristic | Specifications |
---|---|
MATERIAL | STEEL |
MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-46178 MIL SPEC ALL MATERIAL RESPONSES |
FIRST END STYLE | 1 PLAIN |
FIRST END DIAMETER | 1.0908 INCHES MINIMUM AND 1.0913 INCHES MAXIMUM |
END SIMILARITY | NOT IDENTICAL |
SECOND END STYLE | 88 TWO CROSS DRILLED HOLES AND EXTERNALLY THREADED |
SECOND END DIAMETER | 1.0000 INCHES NOMINAL |
SECOND END HOLE DIAMETER | 0.1410 INCHES NOMINAL |
SECOND END DISTANCE FROM HOLE CENTER TO END | 0.250 INCHES NOMINAL |
SECOND END EXTERNAL THREAD LENGTH | 0.750 INCHES NOMINAL |
SECOND END ANGLE BETWEEN HOLES | 90.0 DEGREES NOMINAL |
LARGEST STEP DIAMETER | 2.426 INCHES NOMINAL |
OVERALL LENGTH | 17.735 INCHES MINIMUM AND 17.797 INCHES MAXIMUM |
STEP QUANTITY | 10 |
MANUFACTURERS CODE | 95019 |
DESIGN CONTROL REFERENCE | 30-362-11 |
Restrictions/Controls & Freight Information | NSN 2520-00-752-1019
Category | Code | Description |
---|---|---|
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Controlled Inventory Item Code: | U | UNCLASSIFIED |
Category | Code | Description |
---|---|---|
No Freight Information |