NSN 2520-00-621-0693 D1207, 5Y915, 6210693
Product Details | SLIDING SLEEVE CLUTCH
2520-00-621-0693 An internally splined metallic clutch, operating on a splined shaft, designed to transmit motion or power to an abutting shaft by means of engaging the external splines on the driven shaft. Usually manually operated.
Part Alternates: D1207, 5Y915, 6210693, 2520-00-621-0693, 00-621-0693, 2520006210693, 006210693
Vehicular Equipment Components | Vehicular Power Transmission Components
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
25 | 01 JAN 1963 | 00-621-0693 | 52058 ( CLUTCH, SLIDING SLEEVE, VEHICULAR ) |
Request a Quote
What Our Customers Say
Compare
NSNs for Compare ( up to 4 ): Add 2520-00-621-0693
Related Products | NSN 2520-00-621-0693
Technical Data | NSN 2520-00-621-0693
Characteristic | Specifications |
---|---|
MATERIAL | STEEL |
OUTSIDE DIAMETER | 4.125 INCHES NOMINAL |
OVERALL LENGTH | 1.062 INCHES NOMINAL |
SPLINE TYPE | STRAIGHT |
SPLINE QUANTITY | 10 |
(NON-CORE DATA) END CONFIGURATION | BOTH ENDS SQUARED |
(NON-CORE DATA) FORK RACE LOCATION | LOCATED 0.344 IN. MIN,0.346 IN. MAX FROM END CLUTCH |
(NON-CORE DATA) FORK RACE WIDTH | 0.314 INCHES MINIMUM AND 0.318 INCHES MAXIMUM |
(NON-CORE DATA) FORK RACE DIAMETER | 3.625 INCHES NOMINAL |
(NON-CORE DATA) SPLINE LENGTH | 0.719 INCHES NOMINAL |
(NON-CORE DATA) MATERIAL HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM |
(NON-CORE DATA) SPLINE MAJOR DIAMETER | 2.998 INCHES MINIMUM AND 3.000 INCHES MAXIMUM |
(NON-CORE DATA) SPLINE MINOR DIAMETER | 2.435 INCHES MINIMUM AND 2.439 INCHES MAXIMUM |
(NON-CORE DATA) FSC APPLICATION DATA | POWER TAKE OFF,TANK RECOVERY VEHICLE |
MANUFACTURERS CODE | 61465 |
DESIGN CONTROL REFERENCE | 5Y915 |
Restrictions/Controls & Freight Information | NSN 2520-00-621-0693
Category | Code | Description |
---|---|---|
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Demilitarization Code: | B | Munitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.) |
Precious Metals Indicator Code: | U | Precious metal type is unknown |
Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
Category | Code | Description |
---|---|---|
NMF Description | 126840 | POWER TRANS BELT CLAMPS,GUIDES ETC |
Less than car load rating | M | 85 |
Less than truck load rating | M | 85.0 |
Water commodity Code | 885 | unknown |
Originating Activity Code | XX | |
Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
Air Commodity | B | Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials. |
Air Special Handling | Z | No special handling required. |
Special Handling Code | 9 | unknonwn |
HAZMAT | ||
Type of Cargo | Z | No special type of cargo code applicable |