Product Details | AIRCRAFT SLAT

1560-01-575-7775 A movable control surface attached to the leading edge of a wing or other airfoil which, when extended, creates a slot to allow high-energy air to be introduced into the boundary layer over the top of the airfoil. It prevents stalls at high angles of attack and improves lateral control at lower than normal airspeeds. It is closed during normal flight and forms a profile of the airfoil. Excludes leading edge devices for creating lift that are not slotted to duct air over the top of a wing or other airfoil. Excludes FLAP, WING LANDING.

Part Alternates: 1592942133, 1592942-133, 1560-01-575-7775, 01-575-7775, 1560015757775, 015757775

Aircraft and Airframe Structural Components | Airframe Structural Components

Supply Group (FSG) NSN Assign. NIIN
15 14 JUL 2009 01-575-7775

Cross Reference | NSN 1560-01-575-7775

Part Number Cage Code Manufacturer
1592942-133 98897 LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN AERONAUTICS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 1560-01-575-7775

Technical Data | NSN 1560-01-575-7775

Characteristic Specifications
END ITEM IDENTIFICATION L-1011 TRISTAR AIRCRAFT
PART NAME ASSIGNED BY CONTROLLING AGENCY SLAT AIRCRAFT

Restrictions/Controls & Freight Information | NSN 1560-01-575-7775

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:QStrategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.”
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information