NSN 1560-01-356-3415 28972, 2897-2, 01-356-3415
Product Details | ANTI-ICE DUCT ASSEMBLY
1560-01-356-3415
Part Alternates: 28972, 2897-2, 1560-01-356-3415, 01-356-3415, 1560013563415, 013563415
Aircraft and Airframe Structural Components | Airframe Structural Components
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
15 | 02 APR 1992 | 01-356-3415 | 77777 ( ) |
Cross Reference | NSN 1560-01-356-3415
Part Number | Cage Code | Manufacturer |
---|---|---|
2897-2 | 98085 | COX & COMPANY, INC. |
Request a Quote
What Our Customers Say
Compare
NSNs for Compare ( up to 4 ): Add 1560-01-356-3415
Related Products | NSN 1560-01-356-3415
Technical Data | NSN 1560-01-356-3415
Characteristic | Specifications |
---|---|
GENERAL CHARACTERISTICS ITEM DESCRIPTION | RADIAL INLET INCLUDES TERMINAL AREA WITH TUBING TO SECURE WIRES IN BACKSHELL WITH CLAMP,BOLT,AND NUT; TUBE INCLUDES SAFETY WIRE,STRAIN RELIEF CLAMP AND CONNECTOR |
SPECIAL FEATURES | HEATER CIRCUIT:THREE PHASE,Y CONNECTED,PHASES INTERWOUND;HEATER INPUT POWER:115/200V THREE PHASE,400 HZ.;HEATER INSULATION MAT.:COX SPEC. 4300 ELASTOMER;HEATER ELEMENT:RESISTANCE WIRE; TEMP.SENSOR,BALCO,946 OHMS PLUS OR MINUS 10 OHMS AT 75 DEGREES |
III END ITEM IDENTIFICATION | AIR INLET/PANEL ASSY-RADIAL INLET SPLIT,LOWER;HH65-A AIRCRAFT |
MANUFACTURERS CODE | 98085 |
DESIGN CONTROL REFERENCE | 2897-2 |
Restrictions/Controls & Freight Information | NSN 1560-01-356-3415
Category | Code | Description |
---|---|---|
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
Precious Metals Indicator Code: | A | Item does not contain precious metal |
Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
Category | Code | Description |
---|---|---|
No Freight Information |