Product Details | WING LANDING FLAP

1560-01-183-2031 A movable airfoil, whether hinged, pivoted or mounted on tracks, forming part of the leading or trailing edge of a wing of an aircraft. It is designed for the specific purpose of lowering the landing speed by varying the effective camber and may be used in accelerated takeoffs and improved climbs. Excludes leading edge devices that prevent stalls by ducting air over the top of a wing through extended slats. Excludes SLAT, AIRCRAFT.

Part Alternates: L1804005002, L1804005-002, 1560-01-183-2031, 01-183-2031, 1560011832031, 011832031

Aircraft and Airframe Structural Components | Airframe Structural Components

Supply Group (FSG) NSN Assign. NIIN
15 03 JUL 1984 01-183-2031

Cross Reference | NSN 1560-01-183-2031

Part Number Cage Code Manufacturer
L1804005-002 43999 BOEING COMPANY, THE DBA BOEING

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 1560-01-183-2031

Technical Data | NSN 1560-01-183-2031

Characteristic Specifications
MATERIAL ALUMINUM ALLOY
AIRCRAFT LOCATION FLAP ASSY, NO.5, OUTER PANEL
AIRCRAFT MISSION DESIGN SERIES B-1B
SPECIAL FEATURES C/O: STRINGERS, INTERCOSTALS, CLOSEOUTS, RIBS, SPARS, TRAILING EDGE ASSYS, SKIN, GUSSETS, DOUBLERS, SPLICES, & HARDWARE; OPP -001
MANUFACTURERS CODE 43999
DESIGN CONTROL REFERENCE L1804005-002

Restrictions/Controls & Freight Information | NSN 1560-01-183-2031

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 011760 AIRCRAFT/AIRCRAFT PART VIZ:
Less than car load rating D 200
Less than truck load rating D 200.0
Water commodity Code 671 unknown
Originating Activity Code SX Oklahoma City Air Logistics Center
Tinker AFB, OK 73145-3043
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity
Air Special Handling Z No special handling required.
Special Handling Code Z unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 1560-01-183-2031

Category Code Description
Materiel Management Aggregation CodeEKSX:B-1
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplyFHZOklahoma City Air Logistics Center
Tinker AFB, OK 73145-5989
AgencyDFDepartment of the Air Force
Service OrganizationLLead Service - 22 (Repairable)
ReparabilityTAF Recoverable Assembly Management System (AFRAMS)
Acquisition Advice CodesCSERVICE/AGENCY-MANAGED (Service/Agency use only.) # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by individual Services supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each