NSN 1560-01-146-8357 74A1700041005, 74A170004-1005, 74G1700041025
Product Details | AILERON
1560-01-146-8357 A hinged or pivoted item forming a horizontal control surface, usually a portion of the trailing edge of a wing. Its primary function is to control the roll movement of an airplane or glider about its longitudinal axis.
Part Alternates: 74A1700041005, 74A170004-1005, 74G1700041025, 74G170004-1025, 1560-01-146-8357, 01-146-8357, 1560011468357, 011468357
Aircraft and Airframe Structural Components | Airframe Structural Components
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
15 | 07 FEB 1983 | 01-146-8357 | 60032 ( AILERON ) |
Request a Quote
What Our Customers Say
Compare
NSNs for Compare ( up to 4 ): Add 1560-01-146-8357
Related Products | NSN 1560-01-146-8357
Technical Data | NSN 1560-01-146-8357
Characteristic | Specifications |
---|---|
SPECIAL FEATURES | COGNIZANT SERVICE:NAVY; |
III END ITEM IDENTIFICATION | ACFT MODEL F-18 |
MANUFACTURERS CODE | 76301 |
DESIGN CONTROL REFERENCE | 74G170004-1025 |
Restrictions/Controls & Freight Information | NSN 1560-01-146-8357
Category | Code | Description |
---|---|---|
Shelf-Life Code: | 0 | Nondeteriorative |
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Demilitarization Code: | B | Munitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.) |
Controlled Inventory Item Code: | U | UNCLASSIFIED |
Precious Metals Indicator Code: | A | Item does not contain precious metal |
Criticality Code: | N | The item does not have a critical feature such as tolerance, fit restrictions or application. Nuclear hardness properties have not been determined (not valid for input). |
Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
Category | Code | Description |
---|---|---|
NMF Description | 011760 | AIRCRAFT/AIRCRAFT PART VIZ: |
Less than car load rating | D | 200 |
Less than truck load rating | D | 200.0 |
Water commodity Code | 671 | unknown |
Originating Activity Code | KE | Naval ICP Philadelphia, PA 19111 |
Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
Air Commodity | ||
Air Special Handling | Z | No special handling required. |
Special Handling Code | R | unknonwn |
HAZMAT | ||
Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 1560-01-146-8357
Category | Code | Description |
---|---|---|
Cognizance Codes | 7R | Aeronautical Depot Level Repairable Spares Naval Inventory Control Point, Philadelphia |
Special Material ID | GF | (Non-HSP) FIGHTER SUPPORTAIRCRAFT(F/A-18) |
Issue Repair, or Requisition | AR | Repairable item subject to centrally managed rework program at designated sites. Mandatory turn-in of item required except when initial issue or replacement of surveyed item is involved. |
Special Material Content | 9 | Non-Hazardous or Non-Sensitive Item, does not require hazardous or special handling, packaging or precautions |
Source of Supply | NRP | NAVICP-ERP 700 Robbins Avenue Philadelphia, PA 19111-5098 |
Agency | DN | Department of the Navy |
Service Organization | L | Lead Service - 22 (Repairable) |
Reparability | E | (1) IRAM Program Intensive Management Reparables (2) Material (expendable ordnance) Requiring Lot and Serial Number Control but which is Reported by Serial Number Only |
Acquisition Advice Codes | C | SERVICE/AGENCY-MANAGED (Service/Agency use only.) # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by individual Services supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with Service requisitioning procedures. |
Controlled Item Code | U | UNCLASSIFIED |
Shelf Life Code | 0 | Nondeteriorative |